JVC SR-VS20EK, LPT0543-001A setup guide Video Plus+ System Setup, Guide Program Number Set

73

VIDEO Plus+® System Setup

IMPORTANT

Normally, Auto Set Up ( pg. 8), Preset Download ( pg. 9) or Auto Channel Set ( pg. 64) sets the Guide Program Numbers automatically. You need to set the Guide Program Numbers manually only in the following cases.

●When timer-programming with the VIDEO Plus+ system, the preset position, where the station you wish to record is received on your recorder, is not selected or when you add a channel after Auto Set Up, Preset Download or Auto Channel Set has taken place.

—Set the Guide Program Number for that station manually.

●When you wish to timer-record a satellite programme with the VIDEO Plus+ system.

—Set the Guide Program Numbers for all satellite broadcasts received on your satellite receiver.

Turn on the TV and select the AV mode.

Guide Program Number Set

	ACCESS MAIN MENU
1	SCREEN
	Press MENU.
	ACCESS INITIAL SET
2	SCREEN
	Press %fi to move the highlight bar (pointer) to
	"INITIAL SET", then press OK or #.
	ACCESS GUIDE PROG SET
3	SCREEN
	Press %fi to move the highlight bar (pointer) to "GUIDE
	PROG SET", then press OK or #.
	ENTER GUIDE PROG
4	NUMBER
	Press %fi to enter the			GUIDE PROG SET
	Guide Program number for
	the desired station as shown
	in the TV listings. Then GUIDE PROG				TV PROG
	press OK or #.
				4	5
			[5∞] =		[0] : SAT
			[MENU] : EXIT
		(Ex.) When inputting the
				Guide Program
				number 4 for CH4.

ENTER RECEIVING PRESET POSITION NUMBER

5	Press the NUMBER key "0"			GUIDE PROG SET
	to select "TV PROG" or
	"SAT". Then press %fi to
	input the number of the		GUIDE PROG		TV PROG
	preset position on which
				4	4
	the Guide Program
					CH4
	number's broadcast is
	received by the recorder or
			[5∞] =		[0] : SAT
	the satellite receiver. Then		[MENU] : EXIT
	press OK or #.	(Ex.) If CH4 is received on
				preset position 4.
	● To timer-record a
	satellite programme with
	the VIDEO Plus+ system, you need
	to install the provided Satellite Controller and
	perform the procedure described in "Satellite
	Receiver Control Setting" ( pg. 12).
	● Repeat steps 4 and 5 as necessary.
	RETURN TO NORMAL
	SCREEN
6 Press MENU.

Guide Program Number

"Guide Program (GUIDE PROG) number" refers to the assigned TV station numbers, according to broadcast area, for VIDEO Plus+ timer recording. The Guide Program numbers can be found in most TV listings.