34USINGTHECONFIRMATIONSCREEN
6
q
|
| CH SET | STORE |
|
|
| |
|
| 2 |
|
| 1 | 2 | 3 |
NUMBER | 4 | 5 | 6 |
|
|
| |
| 7 | 8 | 9 |
|
| 0 |
|
3 | OK |
1
PUSH JOG
Storing Channels Manually
Store channels that were not stored during Auto Channel Set.
| ACCESS CH. SET MODE |
1 | MENU |
Press and hold CH SET for more than 2 seconds. The | |
Ch. Set Mode menu appears. | |
| SELECT MODE |
| Press PUSH JOG%Þ to select “MANUAL CH SET”, |
2 then press OK. The Confirmation screen appears. | |
| SELECT POSITION |
| Press PUSH JOG%Þ%%until an open position in |
| which you want to store a channel begins blinking, |
3 then press OK. The Manual Ch. Set screen appears. | |
| INPUT CHANNEL |
| The number "21" appears blinking to the right of "CH". |
| Press the NUMBER keys to input the preset number of |
4 the channel you want to store. |
●Although "CH" is set to "21" when the Manual Ch. Set screen appears, to store channel 21, you must select "21" using the NUMBER keys.
● For fine tuning adjustment, press PUSH JOG %until the item under "CH" begins blinking, then press PUSH JOG%Þ. While tuning, “F+” or
ENTER NEW CHANNEL
INFORMATION
5 Press OK or STORE, and the Confirmation screen appears.
●Repeat steps 3 through 5 as necessary.
CLOSE CONFIRMATION SCREEN
6 Press CH SET.
●To input the station name, see page 36.
●To change positions, see page 35.