![](/images/new-backgrounds/1126270/12627017x1.webp)
9
Clock Set
1 | OPERATE |
|
|
| 2 |
|
| 1 | 2 | 3 |
| CLOCK | 5 | 6 |
2,4 | 4 | ||
7 | 8 | 9 | |
|
| 0 |
|
3
1
6
q
OPERATE 1
OK
PUSH JOG 3
If you performed Auto Channel Set (☞ pg. 8), the recorder’s
–a power outage of more than 3 minutes occurs.
–the tuner has been set manually.
–the user desires to set the clock slightly ahead of the actual time.
–the clock was not set even after Auto Tuner Set was performed.
Whether you perform Auto or Manual clock setting, you can use the convenient Just Clock function.
Just Clock
The Just Clock function provides accurate time keeping through automatic adjustments at regular intervals, by reading data from a PDC signal.
The Just Clock option appears in the Clock Set and Auto Clock Set screens, and can be set “ON” or “OFF” (the default setting is “ON”). Press OK until the Just Clock setting begins blinking, then press PUSH JOG%Þ to change the setting.
IMPORTANT: If you turn off Just Clock off, the accuracy of your recorder’s
Both Auto and Manual clock setting procedures begin from step 3.
Preparation
TURN THE RECORDER ON
1 Press OPERATE. |
|
|
| ||
| ACCESS CLOCK SET |
| |||
| SCREEN |
|
|
| |
| Press CLOCK on the | CLOCK SET |
| ||
| remote control. The Clock | TIME | DATE | YEAR | |
2 Set screen appears. | |||||
0: 00 | 01 . 01 | 00 | |||
|
| JUST | CLOCK: ON | ||
|
| TV. PR |
| 1 | |
|
| [5]: AUTO CLOCK SET | |||
|
| [5°]:ADJUST = | :OK | ||
|
| [CLOCK] : EXIT |
|
Auto Clock Set
SET CLOCK
AUTOMATICALLY
| At the Clock Set screen, | CLOCK SET | |
| press PUSH JOG%. The | ||
| AUTO CLOCK SET | ||
3 Auto Clock Set screen | |||
| |||
| appears and clock setting | PLEASE WAIT | |
| begins. |
|
● If "TV.PR" isn't set to the preset position on which Auto Clock Set data is received, "ERROR"
appears, and then the screen from step 2 reappears. To set "TV.PR", press OK to place the cursor next to it, then cycle through the numbers by pressing PUSH JOG%Þ until the number representing the position in which the station transmitting clock setting data (BBC1, BBC2, etc.) is stored appears.
CONTINUED ON NEXT PAGE.