JVC HR-J235EK specifications Possible Cause, Timer again

Page 41

41

3.

Tape-to-tape editing is not possible.

● The source (another video recorder,

Confirm that the source is properly

camcorder) has not been properly

connected.

connected.

● All necessary power switches have

Confirm that all units’ power switches

not been turned on.

are turned on.

● The input mode is not correct.

Set the input mode to “AU”.

4.

Camcorder recording is not

● The camcorder has not been

Confirm that the camcorder is

possible.

properly connected.

properly connected.

● The input mode is not correct.

Set the input mode to “AU”.

TIMER RECORDING

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

1.

Timer recording won’t work.

● The clock and/or the timer have

Re-perform the clock and/or timer

been set incorrectly.

settings.

● The timer is not engaged.

Press TIMER and confirm that “ä“ is

displayed on the display panel.

2.

On-screen timer programming is

● Timer recording is in progress.

Timer programming can’t be

not possible.

performed while a timer recording is

in progress. Wait until it finishes.

3.

“ä“ and “]“ on the display

● The timer is engaged but there’s no

Load a cassette with the Record

panel won’t stop blinking.

cassette loaded.

Safety tab intact, or cover the hole

using adhesive tape.

4.

The cassette is automatically

● The loaded cassette has had its

Remove the cassette and cover the

ejected, and “ä“ and “]“ on the

Record Safety tab removed.

hole with adhesive tape, or insert a

display panel won’t stop blinking.

cassette with the Record Safety tab

intact.

5.

“ä“ blinks for 10 seconds and the

● TIMER has been pressed when there

Check the programmed data and re-

Timer mode is disengaged.

are no programs in memory, or the

program as necessary, then press

timer record information has been

TIMER again.

programmed incorrectly.

6.

The cassette is automatically

● The end of the tape was reached

The programme may not have been

ejected, the power shuts off and

during timer recording.

recorded in its entirety. Next time

“ä“ and “]“ won’t stop

make sure you have enough time on

blinking.

the tape to record the entire

programme.

7.

Video Plus+ does not timer-record

● The recorder’s preset positions have

Refer to "Guide Channel Set" and

properly.

been set incorrectly.

re-perform the procedure

(☞ pg. 26).

OTHER PROBLEMS

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

1.

Whistling or howling is heard from

● The camcorder’s microphone is too

Position the camcorder so its

the TV during camcorder record-

close to the TV.

microphone is away from the TV.

ing.

● The TV’s volume is too high.

Turn the TV’s volume down.

2.

When scanning presets, some of

● Those presets have been designated

If you need the skipped presets,

them are skipped over.

to be skipped.

restore them (☞ pg. 34).

3.

The preset cannot be changed.

● Recording is in progress.

Press PAUSE to pause the recording,

change presets, then press PLAY to

resume recording.

4.

The remote control won’t operate

● The TV/VCR switch is in the wrong

Set the switch to TV.

my TV.

position.

Image 41

Contents HR-J235EK Do not place the recorder Safety PrecautionsSafety First Step Quick SET UP Installing Your NEW Reco Rder Check ContentsBasic Connections Situate RecorderSET TV Preset Select Output ModeReset Output Mode Tune The TV To Your Video RecorderSatellite Receiver Installin G Your NEW Recorder contdConnection To simple connection to a satellite receiver Outdoor UnitAerial terminal Pin Scart connectorsTurn on the Recorder Tuner SetNitial Sett Ings JOGTurn the Recorder on Clock SetSET Clock Automatically PreparationInitial Settings Preset PositionReturn to Normal Screen SET Date and TimeLoad a Cassette Basic PlaybackPoint Start PlaybackActivate FRAME-BY Playback FeaturesFrame Playback Still Picture/Frame-By- Frame PlaybackActivate HIGH-SPEED Search Activate VARIABLE-SPEED SearchVariable-Speed Search High-Speed Turbo SearchOverride Automatic Tracking Adjust Tracking ManuallyReturn to Automatic Tracking Activate Instant ReviewActivate Repeat Tape Position IndicatorPlayback Repeat PlaybackDisplay Remaining Time Activate Index SearchIndex Search Tape Remaining TimeStop Scene Finder Activate Scene FinderSET Counter Memory Activate CounterRE-SUPPLY Power SET A/B Code SwitchRemote A/B Code Switching Ntsc PlaybackBasic Recording S.T. Picture System Access Mode SelectScreen RecordingPlayback Default setting is ON, so if you want on-screen ENABLE/DISABLEOn-Screen Displays Not, press Push JOG%Þ to place it thereRecording Features Timer Recording Access CH. SET Mode Menu ScreenEx. Preset position Station name Information On Video Plus+Close Menu Enter Preset PositionNumber Timer RECORDINGcont Video Plus+ Timer RecordingAccess Timer PROGRAM- Ming Screen Enter Pluscode NumberEngage RECORDER’S Timer Mode Time Regular Timer ProgrammingCheck And Cancel Programmes Access Programme ScreenReturn to Normal Engage RECORDER’SAuto SP/LP Timer TimerTimer Warning Engage Auto SP/LPEdit To Or From Another Video Recorder SET Recording DECK’S Input ModeMake Connections Start Source PlayerEdit From a Camcorder SET RECORDER’S Input ModeStart Camcorder Start RecorderControl Your TV Using Addi- tional Buttons Remote ControlMulti-Brand Remote Con- trol SET TV Brand CodeSelect Mode Access CH. SET ModeMenu Select PositionDelete Channel Select ItemClose Confirmation Select NEW PositionUsing the Confirmation Screen Switch StationsSelect NEW Station Select Station Name CharacterFine-Tuning Channels Already Stored Perform TuningAccess Manual CH. SET Select Channel to TV Station and ID List Channel Islands TV Station Channel N Umber Guid EBluebell Hill Clear Corrective ActionPossible Cause Timer againQuestions and Answers List Of Terms IndexFront View Rear View ANT. in Connector enables connection of aerial. pgRemote Control How To Use Installing BatteriesProvided accessories Dimensions WxHxD