EN 21
C Watching one program while recording another
1 Engage TV mode
During recording...
●If you connect the TV and the VCR only using the RF connection (☞ pg. 7) to view pictures from the VCR
Press TV/VCR on the Remote so that VCR mode indicator goes off from the front display panel. (The TV broadcast being recorded disappears.)
●If you are using the AV connection (☞ pg. 7) to view pictures from the VCR, change the TV’s input mode from AV to TV.
2 Select channel for viewing
Select the channel, you want to watch, on the TV.
D Showing on-screen display
When “ON SCREEN (REC)” is set to “ON” (☞ pg. 37, 38), you can see the current VCR status on the TV screen.
●For more detailed information about the
1 Display VCR status on TV screen
During recording or | CH | 125 |
| RECORD | ||
recording pause, press | FRI 12:00:00 AM |
| PAUSE | |||
OSD. | 11/30/01 |
|
| ]SP | ||
STEREO |
|
|
|
| ||
All indications | SAP |
|
|
|
|
|
B | + | + | + |
| E | |
corresponding to the |
| |||||
| ||||||
current VCR status are |
|
|
| INDEX 1 | ||
NORM | REMAIN |
| 10:00 | |||
displayed for 5 seconds. |
| COUNT | ||||
|
|
|
|
|
|
The time counter remains
on the screen indicating the elapsed time.
●The indications will be recorded. If you do not want to record the superimposed operational indications on the screen, set “ON SCREEN (REC)” to “OFF”. (☞Ê pg.Ê 37, 38)
2 Exit on-screen display
Press OSD again.
NOTES:
●If the VCR is in recording pause mode, “RECORD/PAUSE” is always displayed (except when "DAY/TIME INSERT" is set to "ON").
●The VCR status can be also displayed during playback.
Other useful functions for recording
●Recording Resume Function
If there is a power outage during recording (or timer recording or Series Recording), the recording will resume automatically when the power is restored to the VCR. (No setting is required for this function.)
●Video Calibration (☞ pg. 38)
When this function is set to “ON”, this VCR checks the condition of the tape in use during playback and recording, and compensates to provide the highest- possible pictures.
●Second Audio Recording (☞ pg. 40)
This VCR’s
To record a SAP program received, set “2ND AUDIO RECORD” to “ON” using the menu screen.
NOTES:
When the channel is changed on the VCR;
●The “STEREO” indication appears on the screen for about 5 seconds if the program is a stereo broadcast.
●The “SAP” indication appears on the screen for about 5Ê seconds if the program is a SAP broadcast.
●Both indications appear when a stereo program is accompanied by SAP sound.
●
This VCR allows you to record on an
●S-VHS ET (☞ pg. 41)
This function allows you to record on VHS tapes with S- VHS picture quality. Tapes recorded using this function can be played back on a VCR equipped with the
To prohibit operations during recording (Mode Lock) Press and hold OK on the Remote for more than 5 seconds. "" and "" light up on the front display panel (☞ pg. 60). No button will function and recording will not be interrupted until it completes.
To resume the other operations, press and hold OK on the Remote again for more than 5 seconds.
●When OK is pressed to set Mode Lock, the