Initial Settings
Clock Setting
Turn on the VCR and TV, and select the VCR channel (or AV mode).
Perform clock setting only if the clock has not been set correctly by the Plug&Play setting.
ESelect D.S.T. mode
Press OK or SHUTTLE PLUS e to move the highlight bar to “D.S.T.”, then press SHUTTLE PLUS rtrepeatedly until the desired setting is selected.
AUTO: Select if you want to adjust your VCR’s clock automatically by the incoming signal from the host channel. (Auto Daylight Saving Time enables automatic adjustment of the VCR’s clock at the start and end of Daylight Saving Time.) Be sure to select the correct time zone manually in step 6.
ON: Adjustment will be made by the
OFF: Select when Daylight Saving Time does not apply to you.
FSelect time zone
Press OK or SHUTTLE PLUS e to move the highlight bar to “TIME ZONE”, then press SHUTTLE PLUS rt repeatedly until “AUTO” or the desired time zone is selected. Each time you press the button, the time zone changes as follows:
{AUTO {ATLANTIC {EASTERN {CENTRAL
{MOUNTAIN {PACIFIC {ALASKA {HAWAII
{(back to the beginning)
GComplete Semiauto Clock Set
Press MENU to return to normal screen.
IMPORTANT
Preparations
AAccess Main Menu screen, then Initial
Set screen
Press MENU on the Remote. Press SHUTTLE PLUS rt to move the highlight bar (arrow) to “INITIAL SET”, then press OK or SHUTTLE PLUS e.
MAIN MENU
FUNCTION SET
TUNER SET
INITIAL SET
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
Turn off the VCR. “Auto” will appear on the display panel while the clock is being set. The current clock time will appear automatically when the clock setting is complete.
Setting clock manually
— Manual Clock Set
First follow steps 1 to 2 in “Preparations” previously described,
B Access Clock Set screen | INITIAL SET | |
Press SHUTTLE PLUS rtto move the |
|
|
CLOCK SET | ||
highlight bar (arrow) to “CLOCK SET”, | GUIDE CHANNEL SET | |
|
| |
then press OK or SHUTTLE PLUS e. |
|
|
|
|
|
| SELECT WITH ( , ) AND (OK) | |
| PRESS (MENU) TO END |
Setting clock semiautomatically
— Semiauto Clock Set
You can change the host channel/D.S.T. (Daylight Saving Time)/ time zone setting manually. First follow steps 1 to 2 in “Preparations” above, then go to the following steps.
C Set Auto Clock to ON |
| CLOCK SET |
| ||
Press OK or SHUTTLE PLUS eon the |
| TIME | DATE | YEAR | |
Remote repeatedly to move the highlight |
| – | 1/ 1 |
| 04 |
| AUTO CLOCK : ON |
| (CATV) | ||
bar to “AUTO CLOCK”, then press |
| HOST CH | : AUTO | ||
| D.S.T. | : AUTO |
| ||
SHUTTLE PLUS rtso that “ON” is |
| TIME ZONE | : AUTO |
| |
| PRESS ( , | ), THEN (OK) | |||
selected. |
| ||||
| PRESS (MENU) TO END |
|
●The time set previously will be erased
when “AUTO CLOCK”, “HOST CH”, “D.S.T.” or “TIME ZONE” setting is changed.
DSelect host channel
You can either select “AUTO” or enter a PBS channel number. Press OK or SHUTTLE PLUS eto move the highlight bar to “HOST CH”, then press SHUTTLE PLUS rt repeatedly until “AUTO” or the desired PBS channel number is selected.
●Some PBS channels do not transmit clock setting data.
then go to the following steps.
C Set time, date and year
Press SHUTTLE PLUS rtuntil the desired time appears, then press OK or SHUTTLE PLUS e. Set the date and year in the same way.
● Holding SHUTTLE PLUS rtchanges the time in
D Select D.S.T. mode
Press OK or SHUTTLE PLUS e to move the highlight bar to “D.S.T.”, then press SHUTTLE PLUS rtto select the desired setting.
ON: Adjustment will be made by the
OFF: Select when Daylight Saving Time does not apply to you.
EStart clock
Press MENU and normal screen appears.
To make corrections any time during the process
Press OK or SHUTTLE PLUS e repeatedly until the item you want to change blinks, then press SHUTTLE PLUS rt.
— 8 —