Satellite Auto Recording
You can automatically record a satellite program which is timer- programed on your DBS receiver.
Turn on the VCR and TV, and select the VCR channel (or AV mode).
REW | FF |
24HR QUICK
REC LINK PROGRAM
POWER | INSERT | A.DUB |
|
|
Child Lock
You can disable the VCR operations.
Turn on the VCR and TV, and select the VCR channel (or AV mode).
AConnect a DBS receiver to the AUDIO/VIDEO IN or
* To use these connectors, you have to select which one to use. ( See pg. 19, “REAR AUX INPUT”.)
BSet timer program on DBS receiver referring to its instruction manual.
CLoad a cassette with the record safety tab intact.
DPress SP/EP to set the tape speed. The selected tape speed will appear on the TV screen.
EPress REC LINK for more than 2 seconds. The VCR turns off
automatically and enter the Satellite Auto Recording standby
mode (“
” and “#” light up). When signals come into the VCR from the DBS receiver, the VCR starts recording (“#” and
“” light up and “
” blinks). When no signals come into the VCR, the VCR stops recording (“” goes off).
NOTES:
●Be sure not to turn on the DBS receiver before the program starts broadcasting; otherwise, the VCR will start recording when the DBS receiver is turned on.
●To disengage the Satellite Auto Recording standby mode, press REC LINK (“
” and “#” go off).
●Depending on the type of satellite receiver, Satellite Auto Recording may not be compatible.
While the VCR is turned on, press and hold POWER 1 on the
Remote for more than 10 seconds.
The VCR turns off, “CL” appears for about 5 seconds on the display panel, then the clock time appears again.
To release the child lock, press and hold POWER 1 on the
Remote until the VCR turns on.
NOTES:
●Pressing TIMER during timer recording, unplugging the AC power cord or a power outage also releases the child lock.
●Even if the child lock function is in use, it is possible to engage and disengage the timer mode with TIMER (#) on the Remote.
●Timer recording programs will be performed even if the child lock function is activated.
●When the child lock function is in use, keep the Remote out of the children’s reach.
— 20 —