JVC HR-DD840U manual Skip Over Unwanted Sections, TimeScan, Skip Search, Speed Audio output

Page 37

EN37

TimeScan

Names of special-effects playback

Speed

Audio output

Reverse

Forward

Search

Play

Slow-Motion

*Still

Slow-Motion

Play

Search

-7x

-5x

-3x

-1x

-1/6x

-1/18x

0

1/18x

1/6x

1x

2x

3x

5x

7x

Audio is output.

Audio is

Audio is

Audio is not

Audio is output.

not output.

output.

output.

* Still mode cannot be engaged using the remote control's TIME SCAN button.

●The speed is shown in the upper right corner of the TV screen for approx. 5 seconds.

●The TimeScan search speed is the same for SP and EP recordings.

●To resume normal playback, press PLAY.

●The playback speed may not change correctly if the VCR's TIME SCAN SHUTTLE ring is turned too quickly.

●When using the VCR's TIME SCAN SHUTTLE ring, the playback speed will change up to 7x and -7x search speeds. Turning the TIME SCAN SHUTTLE ring further will not increase the search speed.

●Picture may be distorted at the position where the recording speed is switched.

●The picture may be noisy for a moment when you change the playback speed.

●During high-speed search with a tape containing both SP and EP recordings, the search speed will change automatically to 7x normal playback speed with TimeScan when the recording tape speed switches from EP to SP.

●Depending on the tape in use, noise may appear or the upper part of the picture may be distorted.

●Picture may appear distorted in comparison to normal playback.

●In TimeScan mode there will be a time lag between the video and the audio and noise may appear in the audio signal.

●TimeScan sound quality will differ in comparison to normal playback.

●When material such as music videos where there is non-stop sound (very few breaks in the soundtrack) are viewed at 2x normal speed, the audio playback may be faster than normal.

●When the playback direction is reversed, it takes approximately 6 seconds until sound is heard.

If you don't want to hear TimeScan audio, set "TIMESCAN AUDIO" to "OFF" (☞ pg. 38).

1 2 3

4

5

6

7 8 9

0

Skip Search

SKIP OVER UNWANTED SECTIONS

1 Press SKIP SEARCH 1 to 4 times during playback. Each press initiates a 30-second period of fast- motion playback. Normal playback resumes automatically.

NOTE:

To return to normal playback during a Skip Search, press PLAY.

SKIP SEARCH

Image 37

Contents HR-DD840U Do not place the VCR Dear CustomerPower Cord Protection Power SourcesPower Lines Grounding or PolarizationDamage Requiring Service AccessoriesCleaning Replacement PartsContents Basic Connections Initial Settings Plug & Play SetupPlug & Play Auto Clock Set/Auto Tuner SetLanguage Select Screen ClockPreparation Time Scan 5, thenAccess Select Screens Select ModeSelect Host Channel Semi-AutoSelect Time Zone Select D.S.T. ModeSET DATE, Time and D.S.T Make CorrectionsAccess Tuner SET Access Main MenuTuner SETInformation Access AFC Screen Access Tuner SET ScreenMake Selection Store or Skip Desired ChannelSituate Controller Cable Box ControlAttach Controller Connect Cable BOX to VCRSet Cable Box Output Channel Return to VCR PLUS+ SET-UP ScreenYou can now set up the VCR Plus+ feature pg Access Cable BOXTurn on Cable BOX Brand SET ScreenVCR Plus+ Guide Channel Matching VCR Plus+ SetupAccess VCR PLUS+ SET-UP Screen Access Custom SET Screen Input Receiving Channel NumberAccess Guide Channel SET Screen Check Input DataConnect DBS Receiver to VCR DBS Receiver ControlDBS receiver PUT, then press OK Set DBS Receiver Output ChannelEnter DBS Receiver Brand Turn on DBS ReceiverSet DBS Receiver Brand DBS Receiver Brand SET, then press OKLoad a Cassette Simple PlaybackFind Program Start Point Start PlaybackSimple Recording Pause During Playback Playback FeaturesActivate FRAME-BY Frame Playback Activate SLOW-MOTIONAdjust Manual Tracking Engage Manual Tracking ModeLayback and Recording Features RE-ENGAGE Automatic TrackingStabilizer Activate VideoReturn to Normal Video StabilizerAccess Superimpose Access Function SETSuperimpose Access Audio Monitor Access Audio SelectSelect The Soundtrack MixStart Search Access Distant CodeIndex Search Instant ReViewStop Repeat Start RepeatActivate Counter MemoryMake Connection Access SpecialFunction Screen AV Compu Link PlaybackPerform AV Compu Link Playback Enable AV Compu Link PlaybackOr Time Example Auto Picture Playback Press Play VCR adjusts Playback picture qualityBased on the quality Tape in useTimeScan Audio signal during TimeScanVariable-Speed Search/ Reverse Motion Playback TimeScan Skip Over Unwanted SectionsSkip Search Speed Audio outputAudio Screen Access TimescanTimeScan Audio CH or Time ScanEngage TV Mode Recording FeaturesReset Counter to Zero Select Channel for ViewingStereo And SAP Second Audio Program Access 2ND AudioTo Record SAP Programs To Record Stereo ProgramsScan Hi-Fi Audio Recording Level ControlEN Timer Recording VCR Plus+ Timer ProgrammingWhen Using The Illumi-Guide Feature GUIDE. The MENU, REWCHECK/CORRECT Input Engage Timer ModeData Time SCAN, Cancel and Menu Access Program SETTime Scan , Cancel and Menu On-ScreenSET Program Information RE-ENGAGE Timer Cancel a ProgramTimer Recording Check And Cancel ProgramsAuto Timer Access Auto TimerOr, during on-screen timer programming Engage ITR Mode Instant Timer Recording ITRSET Recording Duration Press REC on the front panelEdit To Or From Another Mode Edit From a CamcorderPress CH or Time Scan If you are connecting AV cable to the AV Access AUX Input ScreenSet the camcorder to its play mode Set your VCR to its record modeReset the Counter SET Input ModeLocate END Point Locate Start PointStart Editing Engage Insert EditingEND Insert Editing Press InsertEngage Audio Dubbing Audio Dubbing recorderStart Dubbing END Audio DubbingSpecial Features SET Remote Control ModeTurn on the TV SET TV Brand CodeTurn on the Cable BOX Cable Box Multi-Brand Remote ControlEnter Cable BOX Brand Operate Cable BOXDBS Receiver Multi-Brand Remote Control SET Remote ControlCABLE/DBS/VCR switch to VCR Turn on the DBSSET A/B Code Switch Unplug Vcrs PowerPlug in Power Cord Turn VCR Power onTV/CABLE/DBS/VCR switch is Troubleshooting E NCassette gets stuck partway Oubleshooting Timer againWhen scanning channels, some Re-perform the VCR Plus+ setup Doesn’t work properlyResume recording Remote control won’t operate Can the VCR indefinitely remain in the still mode? EN Questions and AnswersCan the VCR indefinitely remain in the Record-Pause mode? What happens if the tape runs out during recording?Index MBR Multi-Brand Remote Code SettingList Of Terms Select DBS Receiver Output ChannelFront View Rear View How To Use Installing BatteriesSpecifications For Servicing Only in U.S.A HOW to Locate Your JVC Service CenterLimited Warranty Warranty Only in U.S.AEMO Memo HR-DD840U