JVC HR-DD840U Unplug Vcrs Power, SET A/B Code Switch, Plug in Power Cord, Turn VCR Power on

Page 58

58EN

SPECIALFEATURES(cont.)

A/B CODE

1 2 3

4

5

6

7 8 9

0

Control Two JVC VCRs

The supplied remote control is capable of controlling two JVC

VCRs independently using the A/B CODE switch. You can set this

POWERVCR so it responds to remote commands only when the switch is set to B, and another VCR so it responds to commands when the switch is set to A. The switch is preset to A because this VCR normally responds to A-code signals. Follow steps 1 – 4 to set this VCR to respond to B-code commands.

			UNPLUG VCR'S POWER
	1		CORD
	1		Unplug from the AC outlet.
	2		SET A/B CODE SWITCH
	2		Set the A/B CODE switch on the remote control to B.
	3		PLUG IN POWER CORD
	3		Plug back in to the AC outlet.
	4		TURN VCR POWER ON
	4		Press POWER on the remote.

The VCR will now respond only to B-code commands.

To set the VCR to respond to A code signals again, repeat the above procedures setting the A/B CODE switch to A, instead of B, in step 2.

You can control two VCRs with the same remote control by switching the remote's code between A and B.

Image 58

Contents HR-DD840U Dear Customer Do not place the VCRPower Lines Power SourcesPower Cord Protection Grounding or PolarizationCleaning AccessoriesDamage Requiring Service Replacement PartsContents Basic Connections Plug & Play Plug & Play SetupInitial Settings Auto Clock Set/Auto Tuner SetLanguage Preparation ClockSelect Screen Time Scan 5, thenSelect Host Channel Select ModeAccess Select Screens Semi-AutoSET DATE, Time and D.S.T Select D.S.T. ModeSelect Time Zone Make CorrectionsTuner Access Main MenuAccess Tuner SET SETInformation Make Selection Access Tuner SET ScreenAccess AFC Screen Store or Skip Desired ChannelAttach Controller Cable Box ControlSituate Controller Connect Cable BOX to VCRReturn to VCR PLUS+ SET-UP Screen Set Cable Box Output ChannelTurn on Cable BOX Access Cable BOXYou can now set up the VCR Plus+ feature pg Brand SET ScreenVCR Plus+ Setup VCR Plus+ Guide Channel MatchingAccess Guide Channel SET Screen Access Custom SET Screen Input Receiving Channel NumberAccess VCR PLUS+ SET-UP Screen Check Input DataConnect DBS Receiver to VCR DBS Receiver ControlDBS receiver Set DBS Receiver Output Channel PUT, then press OKSet DBS Receiver Brand Turn on DBS ReceiverEnter DBS Receiver Brand DBS Receiver Brand SET, then press OKFind Program Start Point Simple PlaybackLoad a Cassette Start PlaybackSimple Recording Activate FRAME-BY Frame Playback Playback FeaturesPause During Playback Activate SLOW-MOTIONLayback and Recording Features Engage Manual Tracking ModeAdjust Manual Tracking RE-ENGAGE Automatic TrackingReturn to Normal Activate VideoStabilizer Video StabilizerAccess Superimpose Access Function SETSuperimpose Select The Soundtrack Access Audio SelectAccess Audio Monitor MixIndex Search Access Distant CodeStart Search Instant ReViewActivate Counter Start RepeatStop Repeat MemoryFunction Screen Access SpecialMake Connection AV Compu Link PlaybackOr Time Enable AV Compu Link PlaybackPerform AV Compu Link Playback ExampleAuto Picture Based on the quality Press Play VCR adjusts Playback picture qualityPlayback Tape in useTimeScan Audio signal during TimeScanVariable-Speed Search/ Reverse Motion Playback Skip Search Skip Over Unwanted SectionsTimeScan Speed Audio outputTimeScan Audio Access TimescanAudio Screen CH or Time ScanReset Counter to Zero Recording FeaturesEngage TV Mode Select Channel for ViewingTo Record SAP Programs Access 2ND AudioStereo And SAP Second Audio Program To Record Stereo ProgramsHi-Fi Audio Recording Level Control ScanWhen Using The Illumi-Guide Feature VCR Plus+ Timer ProgrammingEN Timer Recording GUIDE. The MENU, REWCHECK/CORRECT Input Engage Timer ModeData Time Scan , Cancel and Menu Access Program SETTime SCAN, Cancel and Menu On-ScreenSET Program Information Timer Recording Cancel a ProgramRE-ENGAGE Timer Check And Cancel ProgramsAuto Timer Access Auto TimerOr, during on-screen timer programming SET Recording Duration Instant Timer Recording ITREngage ITR Mode Press REC on the front panelEdit To Or From Another Mode Edit From a CamcorderPress CH or Time Scan Set the camcorder to its play mode Access AUX Input ScreenIf you are connecting AV cable to the AV Set your VCR to its record modeLocate END Point SET Input ModeReset the Counter Locate Start PointEND Insert Editing Engage Insert EditingStart Editing Press InsertStart Dubbing Audio Dubbing recorderEngage Audio Dubbing END Audio DubbingTurn on the TV SET Remote Control ModeSpecial Features SET TV Brand CodeEnter Cable BOX Brand Cable Box Multi-Brand Remote ControlTurn on the Cable BOX Operate Cable BOXCABLE/DBS/VCR switch to VCR SET Remote ControlDBS Receiver Multi-Brand Remote Control Turn on the DBSPlug in Power Cord Unplug Vcrs PowerSET A/B Code Switch Turn VCR Power onTV/CABLE/DBS/VCR switch is Troubleshooting E NCassette gets stuck partway Timer again OubleshootingWhen scanning channels, some Re-perform the VCR Plus+ setup Doesn’t work properlyResume recording Remote control won’t operate Can the VCR indefinitely remain in the Record-Pause mode? EN Questions and AnswersCan the VCR indefinitely remain in the still mode? What happens if the tape runs out during recording?List Of Terms MBR Multi-Brand Remote Code SettingIndex Select DBS Receiver Output ChannelFront View Rear View Installing Batteries How To UseSpecifications HOW to Locate Your JVC Service Center For Servicing Only in U.S.AWarranty Only in U.S.A Limited WarrantyEMO Memo HR-DD840U