JVC HR-A637E Select NEW Position, Select NEW Station, Switch Stations, Character, Perform Tuning

2	SELECT NEW POSITION
	Press PUSH JOG%Þ to move the station to the new
	channel position, then press OK.
	Example: If you moved the station in position 3 to
	position 7, the stations originally in positions 4–7 each
	move up one position.
	● Repeat steps 1 and 2 as necessary.
	RETURN TO NORMAL
3	DISPLAY
	Press CH SET.

Perform steps 1 and 2 of “Storing Channels Manually” on page 24 to access the Confirmation display before continuing.

Set Stations (A)

1	SELECT ITEM
	Press PUSH JOG%Þ until the item you want is
	displayed. Then press OK twice and the station’s name
	(or “– –”) begins blinking.

2	SELECT NEW STATION
	Press PUSH JOG%Þ until the new station’s name you
	want to store begins blinking.
	Registered station names (☞ pg. 26) appear as you
	press PUSH JOG%Þ.

3	SWITCH STATIONS
	Press OK.
	● Repeat steps 1 through 3 as necessary.
	RETURN TO NORMAL
4	DISPLAY
	Press CH SET.

Set Stations (B)

NOTE:

First perform step 1 of the above procedure.

	SELECT STATION NAME
2	CHARACTER
	Press PUSH JOG%and the first letter of the station
	name (or “–”) begins blinking.

EN25

3		ENTER NEW CHARACTER
		Press PUSH JOG%Þ to cycle through the characters
		(A–Z, 0–9, –, , +,	]	(space)) and stop when the
	*				%	to
		desired one is indicated, then press PUSH JOG
		enter. Enter the remaining characters the same way
		(maximum of 4).
		After entering all characters, press OK.
		● Repeat steps 1 through 3 as necessary.
		● If you make a mistake, press PUSH JOG%%until the
		incorrect character begins blinking. Then enter the
		correct character by pressing PUSH JOG%Þ.
		RETURN TO NORMAL
4		DISPLAY
		Press CH SET.

Fine-Tuning Channels

Already Stored

SELECT CHANNEL TO

FINE-TUNE

1 Press PUSH JOG%Þ until the channel you want to tune is displayed.

ACCESS MANUAL CH. SET

DISPLAY

2 Press OK three times. The Manual Ch. Set display appears.

● “OFF” (decoder setting) appears only with A637EH.

PERFORM TUNING

3 Press PUSH JOG%Þ until the picture is its clearest. Then press OK.

● The Confirmation display appears.

● Repeat steps 1 through 3 as necessary.

RETURN TO NORMAL

DISPLAY

4 Press CH SET.