JVC HR-A637EH setup guide Tuner Set

INITIALSETTINGS

EN7

Tuner Set

Your recorder needs to memorise all necessary stations in channel positions in order to record TV programmes. The Auto Tuning System automatically assigns all receivable stations in your area to call them up with the TV PROG. buttons without going through any vacant channels.

The following procedure describes how to select automatic channel setting.

TURN ON THE RECORDER

1 Press OPERATE.
2	ACCESS CH. SET DISPLAY
	Press and hold CH SET for more than 2 seconds.
	“AUTO” appears on the front display panel.
	ACCESS COUNTRY DIS-
	PLAY
	Press OK and the Country display appears on the front
3 display panel.
	SELECT COUNTRY
4		Press PUSH JOG %Þ to select your country’s name.
	The available country names appear in the following
	order:
			“AUT” (Österreich)	“OTHR” (Others)
			“BELG” (Belgium)	“SWED” (Sverige)
			“DEUT” (Deutschland)	“SUOM” (Suomi)
			“DK” (Danmark)	“SUIS” (Suisse)
			“ESP” (España)	“PORT” (Portugal)
			“GRCE” (Greece)	“NOR” (Norsk)
			“ITA” (Italia)	“NL” (Nederland)

●If you selected “BELG” or “SUIS” above . . .

. . . refer to “INFORMATION” at the end of this page.

	START AUTO CHANNEL
5	SET
	Press OK and “AUTO” blinks on the front display
	●panel.If you selected “BELG” or “SUIS” in step 4 . . .
	. . . refer to “INFORMATION” at the end of this page.

		ACCESS CONFIRMATION
6		DISPLAY
		The channel position, channel and station name (ID –
		☞ pg. 26) of the stations located by your recorder
		appear in a Confirmation display.
		(EX.)
		Channel Position	Channel	Station Name
	-		-	-
		Ch=Regular CC=Cable
		Confirm all the stored stations by using PUSH JOG%Þ.
		RETURN TO NORMAL
7		DISPLAY
		Press CH SET.
		● Using the Confirmation display, you can skip or add
		channel positions, enter station names and perform
		other operations. Refer to page 24 for the procedures.
	● Depending on the reception conditions, the stations
		may not be stored in order, and the station names
		may not be stored correctly.
	● If you own the A637EH and use a decoder, ☞ pg. 24
		for information on scrambled broadcasts.

NOTES:

●Fine tuning is performed automatically when you select “AUTO” in step 2. If you want to perform it manually, refer to page 25.

●To set the tuner manually, refer to “Storing Channels Manually” (☞ pg. 24).

INFORMATION

If you selected “BELG” or “SUIS” in step 4, you need to enter the language used in your area. This ensures that stations broadcasting programmes in your language will be stored in the highest channel positions. Once you select a language, the recorder selects the region.

After pressing OK in step 5, perform the following procedure:

1.Press PUSH JOG%Þto select your language.

●Users living in Belgium should select “DEUT”, “FRA” or “NL”.

●Users living in Suisse should select “DEUT”, “FRA” or “ITAL”.

The available languages appear in the following order:

“ENG” (English)	“DK” (Dansk)
“DEUT” (Deutsch)	“SUOM” (Suomi)
“FRA” (Français)	“NOR” (Norsk)
“ITAL” (Italiano)	“SWED” (Svenska)
“CAST” (Castellano)	“NL” (Nederlands)

2.Press OK, then go to step 6.