– Timer Recording –
CPress OK or PROG..
●If “PROGRAM NOT COMPLETED PROGRAM OVERLAP” appears, see “Program overlap warning display”.
DPress TIMER. The VCR turns off automatically and “#” is displayed on the display panel.
To use the VCR while it is in timer recording standby mode
Press TIMER, then press POWER. After you use the VCR, press TIMER again to put the VCR into timer recording standby mode.
Checking, canceling or changing program settings
Program overlap warning display
If “PROGRAM NOT COMPLETED PROGRAM OVERLAP” appears, you have another program overlapping the program you have just made. The Program Check screen appears and conflicting programs will start blinking.
| PR START | STOP | CH | DATE | ||
PROGRAM NOT COMPLETED | 1 | 8:00P | 10:00 | 12 | 12/24 |
|
2 | 10:00A | 10:45 | 40 | 12/25 |
| |
PROGRAM OVERLAP | 3 | 11:30P | 1:00 | 125 | 12/25 |
|
4 | 9:00P | 10:00 | 10 | 12/24 |
| |
| 5 |
|
|
|
|
|
| 6 |
|
|
|
|
|
| 7 |
|
|
|
|
|
| 8 |
|
|
|
|
|
| ( | , ), THEN ( ) (PROG.) : END | ||||
Example:
Program 1 (you have just made) and Program 4 overlap each other
ASelect program to modify
ADisengage timer
Press TIMER, then press POWER.
●When “AUTO TIMER” is set to “ON”, you do not have to press
TIMER.
Press rt, then press e.
●You can only select one of the overlapping programs.
●If you do not mind this overlap, press
PROG. to finish the timer program 
setting. The program starting earlier or program with the lower program number will be
recorded.
BAccess Program Check screen
Press PROG. CHECK.
PR START | STOP | CH | DATE | |
1 | 8:00P | 10:00 | 12 | 12/24 |
2 | 10:00A | 10:45 | 40 | 12/25 |
3 | 11:30P | 1:00 | 125 | 12/25 |
4 |
|
|
|
|
5 |
|
|
|
|
6 |
|
|
|
|
7 |
|
|
|
|
BCancel or change program setting
To cancel a program, press CANCEL when | START |
the Program screen you do not want is | 9:00PM |
DATE | |
shown. | 12/24/00 |
SUN |
PROGRAM 4
STOP 10:00PM
CH
10 SP
CAccess Program screen
Press PROG. CHECK again. Each time you press PROG. CHECK, the next program’s Program screen appears.
8 |
|
|
|
|
|
|
|
|
|
PRESS (CHECK) TO NEXT | |||||||||
| PROGRAM 1 | ||||||||
| START | STOP | |||||||
| 8:00 PM |
|
|
| 10:00 PM |
| |||
| DATE |
|
|
| CH |
| |||
| 12/24/00 |
|
|
| 12 |
| SP |
|
|
To change a program, press the appropriate button:
Program screen on which you want to make changes is shown, then press OK.
● If the overlap is not yet solved, the conflicting programs will be |
shown on the Program check screen. Repeat the above steps |
PRESS (CANCEL) TO CANCEL
PRESS (CHECK) TO NEXT
DCancel or change program setting
To cancel a program, press CANCEL when the Program screen you do not want is shown.
To change a program, press the appropriate button:
EReturn to normal screen
Press PROG. CHECK repeatedly until no Program screen is shown.
FReengage timer recording standby mode
Press TIMER. The VCR turns off automatically and “#” is displayed on the display panel.
●When “AUTO TIMER” is set to “ON”, the timer recording standby mode automatically resumes when you turn off the VCR.
again. |