JVC HR-A630EK, HR-A631EK specifications Ntsc Playback, Soundtrack Selection

PLAY

q 6

2

1 2 3

4 5 6

7 8 9

0

AUDIO MONITOR

PLAY 3 1

15

NTSC Playback

Your video recorder is equipped with NTSC circuitry that can play back NTSC tapes.

1	LOAD A CASSETTE
	Insert a cassette recorded in NTSC.
2	START PLAYBACK
	Press PLAY. “NT” appears on the display panel.
	● Some TVs shrink the picture vertically and place
	black bars at the top and bottom of the screen. This is
	not a malfunction on the part of either the video
	recorder or the TV.
	● The picture may roll up and down. This can be
	corrected using the V-HOLD control found on some
	TVs. (This cannot be corrected if the TV does not
	have a V-HOLD control.)
	● The counter and elapsed tape time readings will be
	incorrect.
	● During search, still, or frame-by-frame playback, the
	picture will be distorted, and there may be a loss of
	colour.
	● Depending on the type of TV, the top and bottom
	portions of superimposed displays may be cut off
	during NTSC playback.

Soundtrack Selection

Your video recorder is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you select.

During Playback

Pressing AUDIO MONITOR on the remote control changes the soundtrack being played back as follows:

TRACK	USE
Recorder's Front Panel
L + R	For Hi-Fi stereo tapes
L	For main audio of Bilingual tapes
R	For sub audio of Bilingual tapes
NORM	For audio-dubbed tapes
L + R + NORM	For audio-dubbed tapes

NOTES:

●"L + R" should normally be selected. In this mode, Hi-Fi stereo tapes are played back in stereo, and the NORM track is played back automatically for tapes with only normal audio.

●For instructions on recording NICAM stereo and bilingual programmes, refer to page 18.

●Bilingual programmes are not currently broadcast in the U.K.