8
INITIALSETTINGS
Tuner Set
Your recorder needs to memorise all necessary stations in preset positions in order to record TV programmes. ATS+ (Auto Tuning System) automatically assigns all receivable stations in your area to call them up with the TV PROG. buttons without going through any vacant channels.
1 | OPERATE |
|
The following procedure describes how to select automatic channel setting.
TURN ON THE RECORDER |
1 Press OPERATE. |
SET | 2,5 | ||||
CH |
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2
1 2 3
4 | 5 | 6 |
7 8 9
0
3
1
4 PUSH JOGÞ%
q 6
TV PROG.
OPERATE 1
TV PROG.
OK 3
2 |
| ACCESS CH. SET DISPLAY | |||
| Press and hold CH SET for more than 2 seconds. | ||||
“AUTO” appears on the front display panel. | |||||
|
| START AUTO CHANNEL SET | |||
3 Press OK and “AUTO" blinks on the front display panel. | |||||
|
| ACCESS CONFIRMATION | |||
|
| DISPLAY |
|
|
|
|
| The preset position, channel and station name (ID – ☞ | |||
|
| pg. 33) of the stations located by your recorder appear | |||
4 in a Confirmation display. |
|
| |||
| Preset Position | Channel Station Name | |||
| - | - | - |
| |
|
|
|
|
|
|
|
| Confirm all the stored stations by using PUSH JOG%Þ. | |||
|
|
|
| ||
|
| RETURN TO NORMAL | |||
5 |
| DISPLAY |
|
|
|
| Press CH SET. |
|
|
| |
|
|
| |||
| ● Using the Confirmation display, you can skip or add | ||||
| preset positions, enter station names and perform | ||||
|
| other operations. Refer to page 29 for the procedures. | |||
| ● Depending on the reception conditions, the stations | ||||
|
| may not be stored in order, and the station names | |||
|
| may not be stored correctly. |
|
|
NOTES:
●Fine tuning is performed automatically when you select “AUTO CH SET”. If you want to perform it manually, refer to page 32.
●To set the tuner manually, refer to “Storing Channels Manually” (☞ pg. 29).