4INSTALLINGYOURNEWRECORDER
Basic Connections
Back of TV
Aerial terminal
21-pin SCART connector
It's essential that your video recorder be properly connected. Follow these steps carefully. THESE STEPS MUST BE COM-
PLETED BEFORE ANY VIDEO OPERATION CAN BE PER- FORMED.
1 | CHECK CONTENTS | |||
Make sure the package contains all of the accessories | ||||
listed in “Specifications” (☞ pg. 43). |
| |||
SITUATE RECORDER | ||||
|
| |||
2 Place the recorder on a stable, horizontal surface. | ||||
|
| CONNECT RECORDER TO |
| |
3 |
| TV | ||
| The connection method you use depends on the type of | |||
| TV you have. | |||
|
|
| ||
| RF CONNECTION | |||
|
| ● To Connect To A TV With NO AV Input Terminals . . . | ||
|
| a– Disconnect the TV aerial cable from the TV. | ||
|
| b– Connect the TV aerial cable to the ANT. IN jack | ||
|
| on the rear panel of the recorder. | ||
|
| c– Connect the provided RF cable between the RF | ||
|
| OUT jack on the rear panel of the recorder and the | ||
|
| TV’s aerial terminal. | ||
| Before operating the recorder, make sure the TV’s preset | |||
| is set to the VIDEO preset. |
AV CONNECTION
●To Connect To A TV With AV Input Terminals . . .
a– Connect the aerial, recorder and TV as per “RF
CONNECTION”.
b– Connect an optional SCART cable between the AV1 IN/OUT socket on the rear panel of the recorder and the TV’s
c– Set the RF OUT switch to OFF.
Before operating the recorder, make sure the TV is set to the VIDEO (or AV) mode.
RF Cable (provided)
Mains Power
Cord
Mains outlet
CONNECT RECORDER TO MAINS
4 Plug the end of the mains power cord into a mains outlet.
R | L |
AUDIO OUT | |
| RF OUT |