Marmitek 100304, 20041 owner manual Installation of the Receiver

Page 7

5.2Installation of the transmitter with extra equipment (such as satellite receiver, VCR or DVD player).

This hook up scheme allows you to watch all sources both in the main room and the second room.

1.Connect the antenna splitter [A] to the aerial connection of your TV

2.Connect the supplied coaxial cable [C] to one side of the antenna splitter [A]

3.Connect the other end of the coaxial cable [C] to the antenna input [3] of the CableLink 75 transmitter

4.Connect the existing coaxial cable (from your Satellite receiver or VCR) to the other end of the splitter.

5.Connect the audio/video output [F] from your DVD player to the audio/video input [4] of the CableLink 75 transmitter [MultiSource function]. A RCA/RCA cable [G] is supplied.

6.Connect the audio/video output [5] of the CableLink 75 transmitter to the audio/video input (SCART) [I] of your TV. To make this connection, you can use the cable you used for connecting your DVD to your TV originally.

7.Insert the plug of the infrared extender cable to output [2] on the CableLink 75 transmitter.

8.Locate the small IR LED’s on the IR sensors of the equipment connected. The IR emitters have an adhesive tape on the back side. Remove the paper protective label and affix the emitter lightly on the facia of your equipment. It may take some adjustments to find the right location.

9.Select a channel with the Channel Selector [9].

10.Connect the power supply [6]

11.Switch on the unit with the ON/OFF switch [7].

12.Make sure the CableLink 75 transmitter is placed some distance away from other items. Do not place the transmitter on top of your audio and/or video equipment. Direct the flat 2,4 GHz antenna [K] in the direction of the Receiver.

5.3 Installation of the Receiver.

Attention: Because of technical reasons, you need to place the CableLink transmitter and receiver together when installing the system. After finishing the installation you can move the receiver to wherever you wish to connect your TV. During the installation the receiver needs to be connected to a (random) TV.

1.Connect the RCA cable with the A/V output on the CableLink receiver [2]. Take care to match the color of the plugs with the color code on the jacks of the receiver.

2.Connect the cable with your television set, use the Scart adaptor marked "Receiver" if connected on the scart input.

3.Select the corresponding channel [3] with your transmitter (set both units on e.g. "C").

4.Connect the powersupply [4]

5.Switch on the unit with the ON/OFF switch [5].

6.Direct the flat 2,4 GHz antenna [K] in the direction of the Transmitter.

CABLELINK

7

Image 7
Contents ABLELINK7CABLELINK75 CABLELINK75 Multisource CableLink 75 systemControl Elements Receiver CableLink 75 TransmitterCableLink 75 Receiver Control Elements, TransmitterScart Installation of the systemVCR OUT SAT OUT Installation of the Receiver In1 Remote Control CableLink 75 channel set upCableLink 75 function keys on your 5in1 Remote Method C Method BMethod a scanning the complete frequency band Universal remote 5in1 Clearing the memory master resetVOL + Button descriptions LED indicator lightInfrared extender Chan + and ChanPLAY, REW, FF, STOP, PAUSE, REC Fast text on / Fast text OFF / Fast text HoldSwitch between antenna signal and audio/video source Identifying codes found using the search procedurePoor quality of some of the TV channels TroubleshootingResetting the configuration of the remote control Poor quality of all TV channelsCant change the order of the channels Remote won’t work with the CableLinkMy CableLink 75 cannot find any channels Do not get the blue screen on my TVMarmitek CableLink 75 Sender Transmitter Beschreibung des SystemsBedienungselemente CableLink 75 Empfänger receiverScart Installation des SystemsVCR OUT SAT OUT Mit der flachen Seite in die Richtung des Empfängers Zeigt den heutigen Kanal des CableLink 75 an das System des In1 Fernbedienung für den CableLinkMethode C Einstellen des SystemsMethode a Methode BMarmitek Löschen des Speichers Universalfernbedienung 5in1Infrarotverlängerung Teletext AN / Teletext AUS / Teletext Hold Beschreibung der Tasten LED-AnzeigeVOL+ CursortastenAnmerkungen Identifizierung der gefundenen Code Die Infrarotverlängerung funktioniert nicht ProblemlösungenDie Bildqualität aller Sender ist schlecht Die Bildqualität einiger Sender ist schlechtMein CableLink 75 kann keine Kanäle finden Die Fernbedienung funktioniert nicht mit dem CableLinkIch bekomme keine blaue Anzeige auf mein Fernsehgerät Ich kann die Reihenfolge der Sender nicht verändern Le sytème CableLink Lire avant de commencerElément de contrôle du Transmetteur Transmetteur CableLinkRécepteur CableLink Installation du sytèmeElément de contrôle du récepteur Radio TV DVD Installation du récepteurFonctionnement du CableLink avec la télécommande Télécommande 5en1Méthode B recherche automatique fréquence normalisée Réglage des canaux du CableLinkMéthode B Méthode CMéthode C utilisation du numéro de canal Description des touches Voyant Télécommande universelle 5in1Effacement de la mémoire master reset Transmission à distance des ordres infrarougesTélétexte Hold Touches de navigationTélétexte on Télétexte OFFMéthode B Changement du code de sécurité de la télécommande 5 en Pannes et problèmes de fonctionnement Je ne parviens pas à changer la numérotation des chaînes La télécommande ne fonctionne pas avec le CableLinkMon CableLink 75 ne parvient pas à trouver une seule chaîne ’écran bleu ne s’affiche pas sur ma TVOpmerking Omschrijving van het systeemBedieningselementen CableLink 75 zender transmitterCableLink 75 Ontvanger receiver Installatie van het systeemScart VCR OUT SAT OUT In1 afstandsbediening voor de CableLink Instellen van het systeem Cablelink Het wissen van het geheugen Infraroodverlenger Universele afstandsbediening 5in1Omschrijving van de toetsen LED indicatielampje Teletekst AAN / Teletekst UIT / Teletekst Hold Cursor toetsenSchakelen tussen antennesignaal en audio/video bron Identificatie van de gevonden codesDe beeldkwaliteit van alle zenders is slecht Oplossen van problemenDe beeldkwaliteit van sommige zenders is slecht Ik krijg geen blauw scherm op mijn TV De infraroodverlenger werkt nietDe afstandsbediening werkt niet met de CableLink Mijn CableLink 75 kan geen kanalen vindenIk krijg niet alle kanalen ingesteld op de CableLink Ik kan de volgorde van de zenders niet veranderenCablelink Frequency CableLink Channel MHz Channel Nr Name Frequency CableLink Channel MHz Channel Nr Name Frequency CableLink Channel MHz Channel Nr Name Technical Data Declaration of Conformity