Other Functions, Checking tape position

– Timer Recording –

To use the VCR while it is in timer recording standby mode

Press TIMER, then press POWER. After you use the VCR, press TIMER again to put the VCR into timer recording standby mode.

Checking, canceling or changing program settings

ADisengage timer

Press TIMER, then press POWER.

●When “AUTO TIMER” is set to “ON”, you do not have to press

TIMER.

Other Functions

Checking tape position

When you change the VCR operation
mode from the stop mode to fast forward
or rewind mode, or when you perform an
Index Search or Instant Review, the tape	B	+ +	+	E
position indicator appears.
position indicator appears.
The position of “q” in relation to “B”
(Beginning) or “E” (End) shows you where
you are on the tape.

●Set “SUPERIMPOSE” to “ON”.

Resetting time counter

BAccess Program Check screen

Press PROG. CHECK.

CAccess Program screen

Press PROG. CHECK again. Each time you press PROG. CHECK, the next program’s Program screen appears.

PR START		STOP	CH	DATE
1	8:00P	10:00	12	12/24
2	10:00A	10:45	40	12/25
3	11:30P	1:00	125	12/25
4
5
6
7
8
	PRESS (CHECK) TO NEXT
	PROGRAM 1
	START		STOP
	8:00 AM		10:00 AM
	DATE		CH
	12/24/00		12	SP

When “SUPERIMPOSE” is set to “ON” and DISPLAY on the Remote is pressed, the on-screen display will appear for about 5 seconds on the TV screen. While the display is shown, press C. RESET on the Remote to reset the time counter to “00:00:00”.

Function settings

You can use the other useful function settings on the Function Set screen.

PRESS (CANCEL) TO CANCEL

PRESS (CHECK) TO NEXT

DCancel or change program setting

To cancel a program, press CANCEL when the Program screen you do not want is shown.

To change a program, press the appropriate button: START+/–, STOP+/–, DATE+/–, CH+/–, and/or SP/EP when the Program screen on which you want to make changes is shown.

AAccess Main Menu screen, then

Function Set screen

Press MENU on the Remote. Press rt to move the highlight bar (arrow) to “FUNCTION SET”, then press OK or e.

MAIN MENU

FUNCTION SET

TUNER SET

INITIAL SET

PRESS (,), THEN (OK)

PRESS (MENU) TO END

EReturn to normal screen

Press PROG. CHECK repeatedly until no Program screen is shown.

FReengage timer recording standby mode

Press TIMER. The VCR turns off automatically and “#” is displayed on the display panel.

●When “AUTO TIMER” is set to “ON”, the timer recording standby mode automatically resumes when you turn off the VCR.

BSelect Function

Press rt to move the highlight bar (arrow) to the function you want to set.

FUNCTION
PICTURE CONTROL	NORM
AUTO TIMER	OFF
SUPERIMPOSE	ON
AUTO SP EP TIMER	OFF
VIDEO STABILIZER	OFF
2ND AUDIO RECORD	OFF
AUDIO MONITOR	HI-FI

SELECT WITH ( , ) AND (OK)