– Buttons, Connectors and Indicators –
Remote
Number keys 
Connections and Plug&Play Setting
ACheck contents
Make sure the package contains all of the accessories listed in “Specifications”.
BAttach the 4 feet as illustrated below
If you want to place the VCR | If you want to place the VCR |
horizontally ... | vertically ... |
| Do not attach the foot on the |
| screw hole. |
Foot
If you place the VCR vertically, attach the wire clamp to hold the AC power cord in place as shown at right.
Stick the wire clamp on the rear of the VCR using the provided adhesive tape with two sides.
On-screen display
If you press OSD on the Remote when “SUPERIMPOSE” is set to “ON”, you can see the current VCR status on the TV screen. Press OSD again to exit
The indications are not recorded even if the VCR is in the recording mode.
CH125 |
| RECORD |
| |||||
|
| |||||||
THU | 12:00 AM |
| PAUSE | |||||
STEREO |
|
|
|
| SP | |||
SAP |
|
|
|
|
|
|
|
|
B | + | + | + |
|
| E |
|
|
|
|
|
| |||||
|
|
| ||||||
NORM |
| INDEX | 1 |
|
| |||
|
|
|
|
|
|
| ||
| COUNT | |||||||
AChannel and auxiliary input
BDay and clock time
CSTEREO program indication
DSAP indication
EAudio monitor indications
FTime counter
GIndex number
HTape position
ICassette mark
JTape speed
KVCR operation mode
Slide the AC power cord into the wire clamp.
CSituate VCR
Place the VCR on a stable, horizontal surface. Do not place the VCR in any other way than illustrated above.
DConnect VCR to TV
RF Connection
ADisconnect the TV antenna from the TV.
BConnect the TV antenna cable to the ANT. IN terminal on the rear of the VCR.
CConnect the supplied RF cable between the TV OUT terminal on the rear of the VCR and the TV’s antenna input terminal.
AV Connection
(improves picture quality during tape playback.)
If your TV is equipped with audio/video input connectors
AConnect the antenna, VCR and TV as shown in the illustration.
BConnect an audio/video cable between the AUDIO/VIDEO OUT connectors on the rear of the VCR and the audio/video input connectors on the TV.
●Even if you are using audio/video cables to connect your VCR to your TV, you must also connect it using the RF cable. This will ensure that you can record one show while watching another.