JVC HR-FS1U manual Timer Recording, Recording Features, Second Audio Recording

– Recording –

Recording Features

Specifying recording length

— Instant Timer Recording (ITR)

During recording, press REC (7) on the VCR repeatedly until the recording length you want appears on the display panel. The REC indicator on the display panel starts blinking.

●Each time you press the button, recording length increases in 30-minute intervals (up to 6 hours).

●The VCR shuts off after recording is finished.

●To cancel an ITR, press STOP (8) on the Remote or STOP/EJECT (0) on the VCR.

Watching one program while recording another

During recording…

●If you connect the TV and the VCR only using the RF connection to view pictures from the VCR, press TV/VCR on the Remote so that VCR mode indicator goes off from the display panel. (The TV broadcast being recorded disappears.)

●If you are using the AV connection to view pictures from the VCR, change the TV’s input mode from AV to TV.

Then, select the channel you want to watch, on the TV.

Second Audio Recording

This VCR’s built-in MTS decoder enables reception of Multichannel TV Sound broadcast. To record a SAP program received, set “2ND AUDIO RECORD” to “ON”.

Timer Recording

Up to 8 timer recording programs can be made using VCR Plus+ timer programing or Express timer programing method as far as a year in advance. Remember, the clock must be set before you can program the timer.

NOTES:

●If all the 8 programs have already been set, “PROGRAM FULL” or “Full” appears on the TV screen or the display panel.

●After timer recording is completed, the VCR turns off automatically.

●You can program the timer recording while a regular recording is in progress; the menu screens will not be recorded.

●To timer-record cable or satellite channels, be sure to keep the cable box or DBS receiver turned on with the correct channel selected.

●In case of a power failure after programming, the VCR’s memory backup keeps your selections for approximately 10 minutes.

Changing VCR Plus+® Setting

The VCR Plus+ programing system assigns a VCR Plus+ guide channel to the TV channels and the cable channels. These guide channel numbers are also called the VCR Plus+ channel codes. Most TV listings have a section, usually a chart, indicating the guide channel numbers assigned to each station.

To ensure that VCR Plus+ timer recording operates correctly, it is necessary to set the VCR Plus+ “Guide Channel Set” for each station.

If you have moved to a different area or if a broadcasting station’s channel number has been changed, perform the following steps to set the correct guide channel number.

A Access Main Menu screen, then	MAIN MENU
Initial Set screen	TUNER SET
	FUNCTION SET
Press MENU on the Remote. Press rt to	INITIAL SET
move the highlight bar (arrow) to “INITIAL
SET”, then press OK or e.	PRESS ( , ), THEN (OK)
	PRESS (MENU) TO END

BAccess Guide Channel Set screen

Press rt to move the highlight bar (arrow) to “GUIDE CHANNEL SET”, then press OK or e.

CInput guide channel number

Press rt or the Number keys to select the VCR Plus+ guide channel number as shown in the TV listing, then press OK or e.

DInput receiving channel number

Press rt or the Number keys to select the number of the channel on which the guide channel’s broadcasts are received, then press OK or e.

●Repeat steps 3 and 4 for each instance.

INITIAL SET

CLOCK SET

LANGUAGE ENGLISH GUIDE CHANNEL SET

SELECT WITH ( ,) AND (OK)

PRESS (MENU) TO END

GUIDE CHANNEL SET

GUIDE CH :	6
VCR CH :	– – –

PRESS NUMBER KEY (0–9)

OR ( ,), THEN (OK)

PRESS (MENU) TO END

GUIDE CHANNEL SET

GUIDE CH :	6
VCR CH :	47

PRESS NUMBER KEY (0–9)

OR ( , ), THEN (OK)

PRESS (MENU) TO END

EReturn to normal screen

Press MENU on the Remote.