![](/images/new-backgrounds/1126279/12627919x1.webp)
VRZ362comb.QX33 4/7/99 8:26 PM Page 10
10 Hookups With a Stereo TV
AUDIO | ANT | ||
IN | |||
| L | ||
|
| ||
OUT | IN |
| |
| R |
| |
VIDEO | OUT | ||
OUT | INCH3 | CH4 |
VIDEO (yellow) and | 2 | |
AUDIO (red and white) OUT Jacks | ||
|
1 antenna or cable to
ANT(enna)
IN Jack
Video Cable
Audio and Video IN Jacks on TV
3 | Audio Cable |
●Audio and Video cables are not supplied.
1
Connect the antenna or cable to the ANT(enna) IN Jack on the back of the VCR.
2
Connect a video cable to the yellow VIDEO OUT Jack on the back of the VCR. Then, connect the other end of the video cable to the VIDEO IN Jack on your TV.
3
Connect an audio cable to the red and white AUDIO OUT Jacks on the back of the VCR. Then, connect the other end of the audio cable to the AUDIO IN Jacks on your TV.
4
Turn on your TV, making sure it is in Line Input mode. Please refer to your TV owner’s manual for details.
Helpful Hints
• A stereo audio cable (not supplied) is used here to deliver audio to the TV’s left and right channels.
• The TV must be in Line Input mode. Please refer to your TV owner’s manual.