Magnavox VRZ362AT owner manual Automatic Operation Features

Page 53

VRZ362comb.QX33 4/7/99 8:27 PM Page 53

Automatic Operation Features 53

The following playback features will always operate.

Automatic Playback

When you put a tape in the VCR, the power will come on auto- matically. If the tape’s record tab is missing, playback will begin. If a timer recording is set, the power will not come on automati- cally when you insert a tape with the record tab intact.

If a timer recording is set and the VCR power is off, the VCR will eject the tape if the record tab is missing.

Automatic Rewind, Eject, Off

When a tape is played, fast forwarded, or recorded to its end, the VCR will rewind the tape, stop, eject the tape, and turn itself off. If the real-time counter memory is set, the VCR will only rewind the tape to the point at which the counter is set to zero, then stop. The VCR will not eject the tape automatically or shut itself off.

Tape Eject

A tape can be ejected with the VCR power on or off (but the

VCR must be plugged in).

Automatic Tracking Adjustment

The VCR adjusts tracking automatically to give you the best possi- ble picture quality. With some recordings, however, you may get a better picture using the manual tracking controls (see below).

Manual Tracking

To manually adjust the tracking during playback and slow motion playback, press the CHANNEL o/p buttons on the VCR or the TRACKING o/p button on the remote control.

Tracking will return to Automatic Tracking Adjustment when you press the STOP/p button or insert a tape.

You cannot manually adjust the tracking of a Still picture. However, you may press the CHANNEL o/p buttons on the VCR to remove vertical jitter in a Still picture.

Before	After
Tracking	Tracking
Adjustment	Adjustment

Image 53

Contents

VRZ362AT For Customer Use Dear Philips Magnavox product ownerIntroduction FeaturesSafety Precautions Table of Contents Before Using Your VCR Disconnect the antenna or cable from your TV Hookups Without a Cable Box / Direct Broadcast SystemCH3 Plug in the TV and the VCRRecording/Viewing Any Channel Hookups With a Cable Box / Direct Broadcast SystemConnections Recording One Channel/Watching Another Hookups With a Cable Box / Direct Broadcast System cont’dHookups With a Stereo TV Turning on Your VCR Press the VCR button, then press the Power buttonPress the VCR button Press the Menu button Automatic Channel SetupAdding/Deleting Channels Automatic Channel Setup cont’dPress the STATUS/EXIT button once or twice to exit Reviewing Memorized ChannelsDo each step within 60 seconds of the previous step Manual Clock SettingSetting the Clock cont’d Press the VCR button, then press the Menu button Automatic Clock SettingTime Zone Daylight-Saving Time Press the VCR button Language SelectionSetting the Remote to Operate a TV Cable BOX Codes Press the Mute button, then press the PAUSE/STILL button If another remote control beepsLetting your VCR find your remote for you Remote Control Buttons VCR Position VCR/TV ButtonTV Position Speed ButtonRemote Control Buttons cont’d If you select Status ON, then select Counter only on Status Display example onlyIf you select Status ON, then select Counter only OFF If you select Status OFFVCR Display Panel Front Panel Rear Panel 1Turn on the TV 2Insert a tape in the VCR PlayingVCR light does not appear, press the VCR/TV button once RecordingTurn on the TV and set it to channel 3 or 4, whichever Recording One Channel/Watching Another Itself off One-Touch RecordingDaily Timer RecordingInstructions continue on Timer Recording cont’dTape Speeds Press the STATUS/EXIT button. Program WAS COMSee page 58 for more hints Checking or Cancelling Timer RecordingsAuto DBS RecordLink Channels Setting Up the VCR Plus+ Programming SystemSetting Up the VCR Plus+ Programming System cont’d Timer Recording With the VCR Plus+ Programming System Timer Recording With the VCR Plus+ Programming System cont’d VCR Rerecording Tape DuplicationPress the F.FWD/B button so that on appears beside Repeat PlayPress the PLAY/o button or the STOP/p button to select Press the VCR button Press the Time Search button Time SearchPress the VCR button Press the Index Search button ExampleDuring tape playback press the Skip Search button Record End SearchSkip Search To resume normal tape playback, press the PLAY/o but- ton Quick SearchReal-Time Counter Memory Super High Speed Searching LP/SLP Forward and Reverse Searching SP/LP/SLPPlaying a Tape at Double Speed Viewing a Still PictureDuring tape playback, press the Slow button. The tape Viewing a Slow Motion PictureAutomatic Operation Features Understanding On-Screen Displays Multi-Channel Television Sound SystemMulti-Channel Television Sound System cont’d Please see additional notes on Hi-Fi Stereo Sound SystemHi-Fi Stereo Sound System cont’d 77-8Helpful Hints Helpful Hints cont’d Cable Box/DBS Output Channel 03 or GlossarySpecifications Video Cassette Recorder Limited WarrantyAutomatic IndexSupplied Accessories