![](/images/new-backgrounds/1163604/16360475x1.webp)
FUNCTION SETUP
The indicators show the progress status...
Getting ready
Loading / Updating
flash alternately
Finish
(Success)(Error)
If the indicator shows Error...
1)Unplug the AC power cord for about 10 seconds,
2)Confirm the current software version.
3)If the software version is updated, the software update has succeeded. If not, please try again.
Initialize
Initialize the setting or SD card.
1In stop mode, press [SETUP].
2Use [K / L] to select , then press [OK].
3Use [K / L] to select a desired option, then press [OK].
•Confirmation message will appear.
“Setup”:
Resets the setup menu to the default.
The setting for “Parental” and “Media Select” will not be reset.
“Format SD Card”
(Available only when an SD card is inserted.): Initializes the SD card.
“Erase Saved
Clears the data saved for the
“Erase Saved
Clears the supplemental data for the
4Select “Yes”, then press [OK].
•Press [OK] again to complete the settings.
5Press [SETUP] to exit.
Caution
•Do not remove the SD card while executing “Format SD Card” or “Erase Saved
•“Format SD Card” and “Erase Saved
38 | EN |