ELAN Home Systems V883 Control Connections VIA!NET, Pin #3 = RS-485 Pin #4 = RS485+ Pin #7 = GND

E L A N H O M E S Y S T E M S V883 INSTALLATION MANUAL

Control Connections - VIA!NET

Use the VIA!NET ports when controlling the V883 with ELAN VIA! Touch Panels, VIA!SC-4 Serial Controller, VIA!2-SS1 System Station and other VIA!NET devices. Use of this method ensures highly reliable control signal integrity and removes the possibility of IR signal “collision” whereby simultaneous IR commands cancel each other. The VIA!NET ports on the V883 can be daisy-chained between chassis and other VIA!NET devices.

Use an ELAN C4545 RJ-45 to RJ-45 interconnect cable to make all VIA!NET con- nections. If the cable assembly is to be custom made, refer to the pin-out diagram below.

VIA!2-SS1

VIA-NET

	PWR
	IR
ELAN
C4545	VIA!NET IN
RJ-45
Connector

ELAN

C4545

RJ-45

Connector

VIA!NET IN

To

Additional

VIA!NET

Devices

VIA!NET OUT

VIA!NET OUT

V883 #1 V883 #2

Insert wires in this order: Blue

White/Blue Orange - RS-485- White/Orange - RS-485+ Green

White Green

Brown - GND

White/Brown

RJ-45 Wired to

ELAN Standards

Standard ELAN RJ-45 Pin-Out

		PIN #		COLOR CODE
			1	BLUE
			2	WHITE/BLUE
FRONT			3	ORANGE
	TAB		4	WHITE/ORANGE
			5	GREEN
			6	WHITE/GREEN
			7	BROWN
			8	WHITE/BROWN

CABLE

Pin #3 = RS-485-

Pin #4 = RS485+

Pin #7 = GND

© ELAN Home Systems 2006 • All rights reserved. Page 9