ELAN Home Systems V883 manual DIP Switch Settings Unit ID, Front Panel Unit ID Designations

V883 INSTALLATION MANUAL E L A N H O M E S Y S T E M S

DIP Switch Settings - UNIT ID

Consult the chart below to determine the correct UNIT ID DIP switch settings. These settings determine which output commands a particular unit responds to. V883s set to UNIT ID 1 will respond to commands specifying Outputs 1-8, UNIT ID 2 responds to commands specifying Outputs 9-16, etc.

Unit ID	Zones	Switch #1 (left)	Switch #2 (center)
1 (Factory Default)	1-8	OFF/UP	OFF/UP
2	9-16	OFF/UP	ON/DOWN
3	17-24	ON/DOWN	OFF/UP
4	25-32	ON/DOWN	ON/DOWN

UNIT ID		UNIT ID		UNIT ID		UNIT ID
UNIT 1		UNIT 2		UNIT 3		UNIT 4
1 2	3	1 2	3	1 2	3	1 2	3
(Factory Default)

Front Panel Unit ID Designations

The Output/Input LED indicators on the front panel display the V883’s Unit ID designation. A decimal point located in the display window indicates the Unit ID for each chassis as shown below.

Unit	Unit
ID #1	ID #2

Unit	Unit
ID #3	ID #4

Page 10 © ELAN Home Systems 2006 • All rights reserved.