E L A N H O M E S Y S T E M S | V883 INSTALLATION MANUAL |
DIP Switch Settings - BAUD RATE
Set the BAUD RATE DIP switch to the 9600 position (Up) when utilizing
UNIT ID | RATE |
| |
UNIT 1 | 9.6KBAUD |
UNIT 3 | |
UNIT 2 |
|
| / |
UNIT 4 | 19.2K |
|
1 2 3
9.6K BAUD
UNIT ID | RATE |
| |
UNIT 1 | 9.6KBAUD |
UNIT 3 | |
UNIT 2 |
|
| / |
UNIT 4 | 19.2K |
|
1 2 3
19.2K BAUD
(Factory Default)
75 Ohm Termination DIP Switch Settings
There are eight 75 Ohm Termination DIP Switches used to optimize video signals when sharing sources with other devices or using multiple V883s. For each input that is shared using a ‘Y’ cable, place the corresponding DIP switch in the OFF/ DOWN position. When not sharing a source, the DIP switch should remain in the factory default ON/UP position.
Not Shared | Shared |
Source | Source |
75 OHM |
INPUT |
TERM |
ON/UP OFF/DOWN
(Factory Default)
© ELAN Home Systems 2006 • All rights reserved. | Page 11 |