Playback Function, Auto Repeat Playback

Insert the prerecorded tape.

PLAYBACK FUNCTION

NORMAL PLAYBACK		SEARCH FUNCTIONS

1The VCR will turn on. If the safety tab has been removed, the VCR will start playback automatically.

2Turn on the TV and set the TV to channel 3 or 4.

Now set the CH3/CH4 switch on the back of the VCR to match the channel selected on the TV.

3Begin playback by pressing the PLAY button.

●Tracking adjustment will be set automatically (Digi- tal Tracking function) when you start playback. To adjust the tracking manually, press the CHANNEL Up or Down button on the VCR.

●When a tape has reached the end, the VCR will re- wind the tape to the beginning, eject the tape, and turn off the VCR automatically.

●S-VHS Quasi Playback (SQPB)

This unit allows you to view a tape recorded in S-VHS format. (Noise lines may appear on the picture.)

4To stop playback, press the STOP button.

PICTURE SEARCH

If you want to skip or repeat a scene while in the play mode, press the F.FWD or REW button.

●Press it again and the VCR will now search in super high speed. (in the LP / SLP modes only)

TIME SEARCH

You can skip a program for a desired length of time.

1) Press the SEARCH MODE TIME S		EARCH
button so that the Time	2 : 5 0
	2 : 5 0

Search menu appears.

2)Enter your desired time to skip by pressing the PLAY or STOP button within 30 sec- onds.

3)Press the F.FWD or REW button to start time search. If you want to go in the forward direction, press the F.FWD button. If you want to go in the reverse di- rection, press the REW button.

●After time search, the VCR will play the tape auto- matically.

STILL/SLOW

1)You can freeze the picture on TV screen by pressing the PAUSE/STILL button during playback.

●You can advance the picture by one frame at a time by pressing the PAUSE/STILL button during the still mode.

2)You can see the slow motion by pressing the SLOW button during playback or the still mode.

●If the noise bar appears on the TV screen, you can re- duce it by pressing the CHANNEL Up or Down button.

●After the VCR has been in Still/Slow mode for 5 min- utes, it will stop automatically to protect the tape and the video head.

●To return playback, press the PLAY button.

AUTO REPEAT PLAYBACK

Use this feature allows you to play a tape over and over.

1)Select main menu by pressing the MENU button.

2)Select "AUTO REPEAT" by pressing the PLAY or STOP button.

3)Begin auto repeat playback by pressing the F.FWD button so that [ON] will appear next to "AUTO RE- PEAT" on the TV screen.

●If the on-screen menu still remains, press the RE- SET/EXIT button to exit the menu.

●To cancel the auto repeat mode, press the F.FWD button at step [3] so that [OFF] appear next to "AUTO REPEAT" on the TV screen.

●When you set the auto repeat mode to [ON] while the counter memory mode is ON, the VCR will exit the counter memory mode automatically.

INDEX SEARCH

The index signal is recorded on the tape automatically when the recording is started. If you want to view a re- cording at a specific start point, it can easily be done.

1) Press the SEARCH MODE

INDEX SEARCH

button so that the Index 03 Search menu appears.

2)Enter your desired number by pressing the PLAY or STOP button within 30 seconds.

3)Press the F.FWD or REW button to start index search. If you want to go in the forward direction, press the F.FWD button. If you want to go in the reverse direction, press the REW button.

●After index search, the VCR will play the tape auto- matically.

- 9 -	EN
	0J01

H7836