Roberts Radio C9950 manual Recording from the line in socket

Page 12

Recording from the line in socket

Your cassette recorder can record from any other product that has a 3.5mm headphone or line out socket. Recording from other types of socket is possible using adaptors available from your local dealer.

1.Press the Stop/Eject button to open the cassette compartment. Insert a cassette with the tape facing towards you and the side on which you wish to record uppermost. Close the cassette compartment.

2.Ensure that the Timer and Voice activated switches are set to the 'Off' position.

3.Set the Speed switch to the required position. Reset the Tape counter if desired.

4.Plug one end of the supplied Red patch cord into the line out or headphone socket on the device you are recording from and the other end into the Line In socket on your cassette recorder.

5.Press the Record button to commence recording, the Recording indicator will flash.

6.The recording level is set automatically and is not affected by the setting of the Volume control.

7.To stop the recording press the Stop/Eject button.

11

Page 11 Page 13
Image 12
Page 11 Page 13
Contents C9950 Contents Controls Timer activator socket Timer Display Battery operation & installation Carrying handleUsing the AC adaptor Using headphones not includedCassette Tapes Setting the clock and day of the week Tape speed Listening to cassette tapesRecording from a radio Recording from the internal microphone Recording from the line in socket Recording from an external microphone not supplied To the Line In socketTimed recordings Timed recordings Voice activated recordings Voice activated recording with timer Remote switch operation Recording a telephone call Press the Record buttonLine out socket Cleaning the heads Preventing accidental erasureSpecifications Circuit Features GeneralGuarantee Roberts Radio Technical Services
Top Page Image Contents