Roberts Radio C9950 manual Recording a telephone call, Press the Record button

Page 19

Recording a telephone call

It is possible to purchase a BT socket recording lead from your local electronic component specialist (e.g. Maplin).

1.Connect the telephone recording lead to the Mic socket on the front of your cassette recorder.

2. Connect your telephone to the telephone record adaptor. (Refer to instructions included with the adaptor.)

3. Set the Speed switch to the required position.

4.Set the Voice Activated switch to the 'On' position.

5.Press the Record button.

6. Set Voice Sensitivity switch to position 2. Check recording starts when telephone conversation begins.

7. On the bottom of your cassette recorder there is a switch to insert a Beep into your recorded conversations at regular intervals to advise both parties that they are being recorded. Set the Beep switch to the 'On' position to activate this function.

If you need any further advice, please call our Technical Helpline on

18

0208 758 0338 (Mon-Fri)

Page 18 Page 20
Image 19
Page 18 Page 20
Contents C9950 Contents Controls Timer activator socket Timer Display Carrying handle Battery operation & installationUsing headphones not included Using the AC adaptorCassette Tapes Setting the clock and day of the week Listening to cassette tapes Tape speedRecording from a radio Recording from the internal microphone Recording from the line in socket To the Line In socket Recording from an external microphone not suppliedTimed recordings Timed recordings Voice activated recordings Voice activated recording with timer Remote switch operation Press the Record button Recording a telephone callLine out socket Preventing accidental erasure Cleaning the headsGeneral Specifications Circuit FeaturesGuarantee Roberts Radio Technical Services
Top Page Image Contents