Roberts Radio C9950 manual Voice activated recording with timer

Page 17

Voice activated recording with timer

Your cassette recorder can also be programmed for a timed voice activated recording. This might be used to record sounds in a room at a certain time of day or to record a conference that you are unable to attend.

1. For highest quality recordings set the Speed switch to the "Normal" position. For maximum recording time set the Speed switch to the "Quarter" position

2. Set the timer as instructed on page 13-15.

3. Insert a cassette with the tape facing towards you and the side on which you wish to record uppermost. Close the cassette compartment. Reset the Tape counter if desired.

4.Set the Voice Activated switch to the 'On' position.

5.Press down the Record button.

6.The timer will activate the recorder but recordings will only be made

when sound is present at the internal Microphone socket or Line in sockets.

If you need any further advice, please call our Technical Helpline on

16

0208 758 0338 (Mon-Fri)

Page 16 Page 18
Image 17
Page 16 Page 18
Contents C9950 Contents Controls Timer activator socket Timer Display Carrying handle Battery operation & installationCassette Tapes Using the AC adaptorUsing headphones not included Setting the clock and day of the week Listening to cassette tapes Tape speedRecording from a radio Recording from the internal microphone Recording from the line in socket To the Line In socket Recording from an external microphone not suppliedTimed recordings Timed recordings Voice activated recordings Voice activated recording with timer Remote switch operation Press the Record button Recording a telephone callLine out socket Preventing accidental erasure Cleaning the headsGeneral Specifications Circuit FeaturesGuarantee Roberts Radio Technical Services
Top Page Image Contents