Topfield TF 6000 PVR ES Switching on for the ﬁrst time, Inserting batteries in the remote control

Page 25

2.5 Switching on for the ﬁrst time 17

To enjoy Dolby digital audio, your televi- sion or audio system must be able to decode Dolby digital audio, and you will need to obtain a S/PDIF cable. Plug one end of the cable into the S/PDIF socket on the digi- tal receiver, and plug the other end into the matching socket on your audio system.

2.4.3 Connecting to your video cassette recorder

The digital receiver can also output video to another appliance such as a video cassette recorder or video receiver through an auxiliary SCART connector.

You will need to obtain a SCART cable to use the auxiliary SCART connector. Plug one end of the cable into the VCR socket on the digital receiver, and plug the other end into the matching socket on your video cassette recorder or suchlike.

2.5Switching on for the ﬁrst time

Now that you have your digital receiver connected, you should plug it in to a mains socket. Ensure that your television set is turned on, so that you will be able to see the display from the digital receiver.

2.5.1 Inserting batteries in the remote control

To insert the batteries, open the battery compartment by remov- ing the lid, and then insert the batteries observing the polarity, which is marked on the base of the battery compartment.

If the digital receiver no longer reacts properly to remote con- trol commands, the batteries may be ﬂat. Be sure to remove

Image 25

Contents TF 6000 PVR ES Page Contents Preference Settings Listing Services Accessing to The Digital Receiver via The Internet Index Page Introduction FeaturesControlling the digital receiver Controlling the digital receiver Front panel Mo e Is used to set a sleep timer Remote control § 5.6 for information about picture-in-picture What is common interface? Safety precautions SetupUnpacking Setup Rear panel connections USB Connecting up your digital receiverConnecting the antenna Connecting to your television To use the Hdmi connector To use the S-Video connector Connecting to your video cassette recorder Switching on for the ﬁrst timeInserting batteries in the remote control Powering on and checking picture Language settings Preference SettingsSubtitle language Television standard Video and audio settingsColour model Television aspect ratio Video cassette recorderHigh deﬁnition television Audio mode Local time settingVideo scaling Parental control Preference Settings Time offset table City Parental control To turn on the time shift feature Adjusting the on-screen displayTo use MediaHighway programme guide To use MediaHighway programme guide Searching broadcasting services Service Search1 Conﬁguring LNB settings Searching broadcasting services Service Search 2 Conﬁguring DiSEqC 1.2 settings 3 Conﬁguring Usals settings Searching broadcasting services Searching every service of a satellite Searching servicesSearching one service of a transponder Searching every service of Smatv system Copying servicesResetting to factory settings Daily Usage Volume controlWatching television Button performs an alphabetic browse. For Daily Usage Favourite services list Viewing programme information Selecting subtitle tracks Selecting audio tracksViewing teletext Viewing electronic programme guide Watching multifeed programme Using time shiftDaily Usage Using picture in picture Editing the services list Listing ServicesService with the Button, and then press Editing the favourite list Button and the highlight bar get moved to Transferring receiver data How to use on-screen keyboardEditing channel data on your computer Editing channel data on your computerSelect the Up & Down Download to STB menu Editing satellite and transponder list Listing Services Editing television and radio services list Editing favourite list Editing channel data on your computer Recording and Playing Instant recording Recording a programmeRecording and Playing Timer recording Recording and Playing Recording a programme Recording a time-shifted programme Scheduling recordings using the programme guideRecording a pay service programme To delete a recording File archiveTo sort recordings To rename a recording To lock a recordingTo move a recording to another folder Playing back a recording To navigate using the progress barTo play in fast motion To play in slow motionTo play back a recording repeatedly To make a bookmarkTo play back a scrambled recording To play back recordings in sequenceMP3 playback Copying a recordingTransferring recording ﬁles Instructions on how to use Altair are as follows Formatting the hard disk Accessing to The Digital Receiver via The Internet Conﬁguring the router To access within the local area networkTo access on the level of the Internet Conﬁguring the router Conﬁguring the network settings on the digital receiver Accessing the web server Accessing to The Digital Receiver via The Internet Accessing the FTP server Accessing to The Digital Receiver via The Internet Topﬁeld Application Program 90 Topﬁeld Application Program Checking the ﬁrmware information Firmware UpdateFrom your computer via USB port From another digital receiver via RS-232 port From your computer via RS-232 portTurn off the target digital receiver Over the airOver the air Index Page Smatv Usals Page Page Correct disposal of this product