7.1 Recording a programme 65
To stop recording, press the button; then a box like the left figure appears, which
shows programmes currently be- ing recorded. If you select one, its recording will stop.
While a recording is going on, you can watch or record another service.
To additionally record another service, switch to the service you want to record, and press the button.
Once a recording is started, it is put on the recorded programme list even though it is not finished yet. The recording file is named after its service name with a suffix of a number. To view the recorded programme list, press the button or alter- natively select the File List menu.
See § 7.2 for detailed description about the recorded pro- gramme list.
7.1.2 Timer recording
You can set a service to be recorded at a specific time. Even if the digital receiver is in standby mode, it will switch into operation mode and start recording at a specified time. When the recording comes to the end, the digital receiver will switch back into standby mode again in one minute. However, if you press any button on the remote control or on the front panel even just one time, the digital receiver will not switch into standby mode.