Topfield TF 6000 PVR ES manual Video and audio settings, Television standard, Colour model

Page 29

3.2 Video and audio settings 21

3.2Video and audio settings

You have to configure the video and audio settings appropriately to your television set and other appliances.

Select the System Setting > A/V Output Setting menu. You should see a screen like the left figure.

3.2.1 Television standard

The digital receiver supports two television standards. One is PAL standard, and the other is NTSC standard. PAL was adopted in European countries while NTSC is adopted in USA, Canada, Mexico and so forth.

If you have a PAL television, you have to set the TV Type option to PAL. In that case, if you switch to a service of the NTSC standard, the digital receiver will presents the pictures converting into the PAL standard. However, it is inevitable to lose a little picture quality. Likewise, the contrary case brings about the same result.

The best thing is to watch PAL services with a PAL television and to watch NTSC services with a NTSC television. However, a multi television set is able to process both of them. So if you have a multi television set, you had better set the TV Type option to Multi. Then the digital receiver will present pictures without standard conversion.

3.2.2 Colour model

Through the TV SCART connector, the digital receiver is able to output video in various colour models. If you have the

Image 29
Contents TF 6000 PVR ES Page Contents Preference Settings Listing Services Accessing to The Digital Receiver via The Internet Index Page Introduction FeaturesControlling the digital receiver Controlling the digital receiver Front panel Mo e Is used to set a sleep timer Remote control  § 5.6 for information about picture-in-picture What is common interface? Unpacking SetupSafety precautions Setup Rear panel connections USB Connecting up your digital receiverConnecting the antenna Connecting to your television To use the Hdmi connector To use the S-Video connector Inserting batteries in the remote control Switching on for the first timeConnecting to your video cassette recorder Powering on and checking picture Language settings Preference SettingsSubtitle language Colour model Video and audio settingsTelevision standard Television aspect ratio Video cassette recorderHigh definition television Video scaling Local time settingAudio mode Parental control Preference Settings Time offset table City Parental control To use MediaHighway programme guide Adjusting the on-screen displayTo turn on the time shift feature To use MediaHighway programme guide 1 Configuring LNB settings Service SearchSearching broadcasting services Searching broadcasting services Service Search 2 Configuring DiSEqC 1.2 settings 3 Configuring Usals settings Searching broadcasting services Searching every service of a satellite Searching servicesSearching one service of a transponder Searching every service of Smatv system Copying servicesResetting to factory settings Watching television Volume controlDaily Usage Button performs an alphabetic browse. For Daily Usage Favourite services list Viewing programme information Viewing teletext Selecting audio tracksSelecting subtitle tracks Viewing electronic programme guide Watching multifeed programme Using time shiftDaily Usage Using picture in picture Editing the services list Listing ServicesService with the  Button, and then press Editing the favourite list Button and the highlight bar get moved to Transferring receiver data How to use on-screen keyboardEditing channel data on your computer Editing channel data on your computerSelect the Up & Down Download to STB menu Editing satellite and transponder list Listing Services Editing television and radio services list Editing favourite list Editing channel data on your computer Recording and Playing Instant recording Recording a programmeRecording and Playing Timer recording Recording and Playing Recording a programme Recording a time-shifted programme Scheduling recordings using the programme guideRecording a pay service programme To sort recordings File archiveTo delete a recording To move a recording to another folder To lock a recordingTo rename a recording Playing back a recording To navigate using the progress barTo play in fast motion To play in slow motionTo play back a recording repeatedly To make a bookmarkTo play back a scrambled recording To play back recordings in sequenceMP3 playback Copying a recordingTransferring recording files Instructions on how to use Altair are as follows Formatting the hard disk Accessing to The Digital Receiver via The Internet Configuring the router To access within the local area networkTo access on the level of the Internet Configuring the router Configuring the network settings on the digital receiver Accessing the web server Accessing to The Digital Receiver via The Internet Accessing the FTP server Accessing to The Digital Receiver via The Internet Topfield Application Program 90 Topfield Application Program Checking the firmware information Firmware UpdateFrom your computer via USB port From another digital receiver via RS-232 port From your computer via RS-232 portTurn off the target digital receiver Over the airOver the air Index Page Smatv Usals Page Page Correct disposal of this product