Topfield TF 6000 PVR ES manual Searching one service of a transponder

Page 45

4.1 Searching broadcasting services 37

1.Choose your desired satellite at the Satellite Name op- tion.

2.Set the Search Mode option to Manual.

3.Choose your desired transponder at the Frequency op- tion or enter it with the numeric buttons.

4.Enter the symbol rate of your desired transponder to the Symbol Rate option with the numeric buttons.

5.Set the Polarization option to the polarization of your desired transponder.

6.If you set the Network Search option to On, the digital receiver will check up the up-to-date channel information as searching services, but it takes rather longer time.

NOTE

You may get transponder information from a satellite magazine or web site such as http://www.satcodx.com or http://www. lyngsat.com.

Searching one service of a transponder

To search one service of a transponder, perform the following steps:

1.Choose your desired satellite at the Satellite Name op- tion.

2.Set the Search Mode option to Advanced.

3.Choose your desired transponder at the Frequency op- tion or enter it with the numeric buttons.

4.Enter the symbol rate of your desired transponder to the Symbol Rate option with the numeric buttons.

5.Set the Polarization option to the polarization of your desired transponder.

6.Specify the packet identiﬁers of your desired service at the PID option with the numeric buttons. A packet iden- tiﬁer is used to verify audio and video streams.

Image 45

Contents TF 6000 PVR ES Page Contents Preference Settings Listing Services Accessing to The Digital Receiver via The Internet Index Page Introduction FeaturesControlling the digital receiver Controlling the digital receiver Front panel Mo e Is used to set a sleep timer Remote control § 5.6 for information about picture-in-picture What is common interface? Setup Safety precautionsUnpacking Setup Rear panel connections USB Connecting up your digital receiverConnecting the antenna Connecting to your television To use the Hdmi connector To use the S-Video connector Switching on for the ﬁrst time Connecting to your video cassette recorderInserting batteries in the remote control Powering on and checking picture Language settings Preference SettingsSubtitle language Video and audio settings Television standardColour model Television aspect ratio Video cassette recorderHigh deﬁnition television Local time setting Audio modeVideo scaling Parental control Preference Settings Time offset table City Parental control Adjusting the on-screen display To turn on the time shift featureTo use MediaHighway programme guide To use MediaHighway programme guide Service Search Searching broadcasting services1 Conﬁguring LNB settings Searching broadcasting services Service Search 2 Conﬁguring DiSEqC 1.2 settings 3 Conﬁguring Usals settings Searching broadcasting services Searching every service of a satellite Searching servicesSearching one service of a transponder Searching every service of Smatv system Copying servicesResetting to factory settings Volume control Daily UsageWatching television Button performs an alphabetic browse. For Daily Usage Favourite services list Viewing programme information Selecting audio tracks Selecting subtitle tracksViewing teletext Viewing electronic programme guide Watching multifeed programme Using time shiftDaily Usage Using picture in picture Editing the services list Listing ServicesService with the Button, and then press Editing the favourite list Button and the highlight bar get moved to Transferring receiver data How to use on-screen keyboardEditing channel data on your computer Editing channel data on your computerSelect the Up & Down Download to STB menu Editing satellite and transponder list Listing Services Editing television and radio services list Editing favourite list Editing channel data on your computer Recording and Playing Instant recording Recording a programmeRecording and Playing Timer recording Recording and Playing Recording a programme Recording a time-shifted programme Scheduling recordings using the programme guideRecording a pay service programme File archive To delete a recordingTo sort recordings To lock a recording To rename a recordingTo move a recording to another folder Playing back a recording To navigate using the progress barTo play in fast motion To play in slow motionTo play back a recording repeatedly To make a bookmarkTo play back a scrambled recording To play back recordings in sequenceMP3 playback Copying a recordingTransferring recording ﬁles Instructions on how to use Altair are as follows Formatting the hard disk Accessing to The Digital Receiver via The Internet Conﬁguring the router To access within the local area networkTo access on the level of the Internet Conﬁguring the router Conﬁguring the network settings on the digital receiver Accessing the web server Accessing to The Digital Receiver via The Internet Accessing the FTP server Accessing to The Digital Receiver via The Internet Topﬁeld Application Program 90 Topﬁeld Application Program Checking the ﬁrmware information Firmware UpdateFrom your computer via USB port From another digital receiver via RS-232 port From your computer via RS-232 portTurn off the target digital receiver Over the airOver the air Index Page Smatv Usals Page Page Correct disposal of this product