4.Installing the DVD player Mounting the DVD player
WARNING!
Always use great care when attaching anything to a vehicle! Visually inspect all sides of any potential screw location, to insure no damage will occur. If you have questions about this process, see your authorized Rosen dealer.
CAUTION!
Do not overtighten the screws on uneven surfaces! This can cause damage to the unit. If an even mounting surface can- not be found, fabricate a flat panel, mount the unit to it, and mount that panel to the vehicle
First, temporarily remove the Phillips side screws from the unit as shown.
Next, use these screws to attach the mounting brackets to the unit. Depending on the installation location, you will orient them either up or down.
Finally, attach the mounting brackets to the mounting surface in a safe and secure fashion.
R5505 15