Sherwood CDC-690T operating instructions Before Operation

Page 10

ENGLISH

Before Operation

• Only compact discs bearing this mark can be reproduced.

• In handling a disc, hold it carefully with the edges.

Notes

•Do not expose discs to direct sunlight, high humidity or high temperature for a long time.

•When loading or unloading a disc in the disc tray, always place it with the printed side up.

•Do not stick paper or write anything on the printed surface.

•Fingermarks and dust on the recorded surface should be carefully wiped off with soft cloth.

Wipe straight from the inside to the outside of the disc.

•Always keep the discs in their cases after use to protect them from dust and scratches.

•Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury and apparatus malfunction.

Tray	Printed side

•The DTS logo on the front means that the CD encoded with the DTS signal can be heard in DTS mode when this digital out is connected to the digital input of the amplifier with the DTS decoder, etc..

•“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

1 0

Image 10

Contents CDC-690T Introduction For Your Safety Read this Before OperatingContents Rear Panel Connections Model NO. CDC-690TFront Panel & Remote Controls Remote ControlsPress this button to open or close the disc tray This receives the signals from the remote controlLoad a compact disc on the disc tray Press this button to play tracks on CDs in random sequenceFluorescent Display Remote Control Operation Range PolarityBefore Operation Operations Turn the power on Load the discs and close the disc trayIndicator lights up when the number of tracks is To stop playSelecting a disc Changing Discs DuringSkip and Search Play Searching for a passage during playPlaying Tracks in Random Sequence Playing the First 10 Seconds of Each TrackRepeating a specific passage during Repeat PlayRepeating a single track during play PlayPlaying Tracks in ANY Sequence Stop mode, enter the program modeSelect the desired disc Example When selecting the disc Programming the tracks on the CDsChecking the programmed selections Rectifying any wrong programmed selectionClearing the programmed selections Find the desired selection and clear it in the program modeOpening the disc tray clears all programmed selections, too Making auto edit Stop mode, select the auto edit ModeEditing for Recording Tracks to be recordedStop mode, select the manual edit Mode Making manual editChecking the edited tracks Selecting a BrightnessClearing all edited tracks Selecting a track, the selected disc is deleted as a Deleted PlayIf the DELETE/REVIEW button is pressed without Selected track is deleted automatically withoutOpening the disc tray recovers all deleted selections, too Recovering the deleted selectionsFind the desired track and recover it in the delete mode Checking the deleted selectionsUsing the Headphones Selecting a Time DisplayTroubleshooting Guide Problem Possible Cause RemedySpecifications 5707-04725-009-0