Sherwood CDC-690T Load a compact disc on the disc tray, Use this button to select the tape length

Page 7

POWER SWITCH

Press this switch to turn the power on and press again to turn the power off.

For system operation, plug the AC input cord into the switched AC outlet on amplifier or receiver, keep the POWER switch ON and control power ON/OFF with the power operation on the amplifier or receiver.

DISC TRAY

Load a compact disc on the disc tray.

OPEN/CLOSE BUTTON( )

Press this button to open or close the disc tray.

PLAY/PAUSE BUTTON ( /)

Press this button to start play in the stop or pause mode. Press this button to interrupt play temporarily and press again to restart play.

STOP/CLEAR BUTTON ( )

Press this button to stop play, clear the programmed selections or recover the deleted selections.

BACKWARD SKIP/SEARCH BUTTON()

Press this button to replay from the beginning of the current track or return to a previous track.

Press and hold down this button search for a specific passage in fast backward.

FORWARD SKIP/SEARCH BUTTON()

Press this button to play from the beginning of a next track.

Press and hold down this button to search for a specific passage in fast forward.

RANDOM PLAY BUTTON

Press this button to play tracks on CDs in random sequence.

REPEAT 1/ALL BUTTON

Press this button to play a track, a disc or all discs repeatedly.

REPEAT A<->B BUTTON

Press this button to play a specific passage repeatedly.

NUMERIC BUTTONS

Press the corresponding button when selecting tracks or discs for play, programming or deleting, then the selected is played, programmed or deleted directly without the use of the PLAY, PROGRAM/REVIEW or DELETE/REVIEW button.

When selecting a two digit number, the second digit should be pressed within 2 seconds after the first digit has been pressed.

DISC SKIP BUTTON

For loading or unloading discs, press this button to rotate clockwise to the next disc position.

DISC SELECTOR BUTTONS

Use these buttons to select the disc to be played.

TIME BUTTON

Press this button to display the elapsed or remaining playing time of the current track or remaining playing time of the disc.

PROGRAM/REVIEW BUTTON

Press this button to program your favorite tracks, disc or review the programmed selections.

EDIT BUTTON

Press this button to edit the tracks to be recorded onto the tape.

TAPE SIZE BUTTON

Use this button to select the tape length.

DELETE/REVIEW BUTTON

Press this button to delete the undesired tracks, discs or review the deleted selections.

INTROSCAN BUTTON

Press this button to play the first 10 seconds of each track on CDs.

HEADPHONE JACK

Stereo headphones can be plugged into this jack for private listening.

REMOTE SENSOR

This receives the signals from the remote control.

DISC BUTTON

When selecting a disc with this button, press this first and then the desired disc number(1~5) on the numeric buttons within 2 seconds.

DISPLAY BUTTON

Press this button to change the brightness of the display.

FLUORESCENT DISPLAY

For details, refer to the next page.

ENGLISH

7

Image 7
Contents CDC-690T Introduction Read this Before Operating For Your SafetyContents Model NO. CDC-690T Rear Panel ConnectionsRemote Controls Front Panel & Remote ControlsPress this button to play tracks on CDs in random sequence This receives the signals from the remote controlLoad a compact disc on the disc tray Press this button to open or close the disc trayFluorescent Display Polarity Remote Control Operation RangeBefore Operation To stop play Turn the power on Load the discs and close the disc trayIndicator lights up when the number of tracks is OperationsSearching for a passage during play Changing Discs DuringSkip and Search Play Selecting a discPlaying the First 10 Seconds of Each Track Playing Tracks in Random SequencePlay Repeat PlayRepeating a single track during play Repeating a specific passage duringProgramming the tracks on the CDs Stop mode, enter the program modeSelect the desired disc Example When selecting the disc Playing Tracks in ANY SequenceRectifying any wrong programmed selection Checking the programmed selectionsClearing the programmed selections Find the desired selection and clear it in the program modeOpening the disc tray clears all programmed selections, too Tracks to be recorded Stop mode, select the auto edit ModeEditing for Recording Making auto editMaking manual edit Stop mode, select the manual edit ModeChecking the edited tracks Selecting a BrightnessClearing all edited tracks Selected track is deleted automatically without Deleted PlayIf the DELETE/REVIEW button is pressed without Selecting a track, the selected disc is deleted as aChecking the deleted selections Recovering the deleted selectionsFind the desired track and recover it in the delete mode Opening the disc tray recovers all deleted selections, tooSelecting a Time Display Using the HeadphonesProblem Possible Cause Remedy Troubleshooting GuideSpecifications 5707-04725-009-0