Sherwood CDC-690T operating instructions Read this Before Operating, For Your Safety

Page 3

READ THIS BEFORE OPERATING

FOR U.S.A. AND CANADA

120 V

FOR YOUR SAFETY

Units shipped to the U.S.A. and Canada are designed for operation on 120 V AC only.

Safety precaution with use of a polarized AC plug. However, some products may be supplied with a nonpolarized plug.

CAUTION : To prevent electric shock, match wide blade of plug to wide slot, fully insert.

ATTENTION : Pour eviter les choc electriques, introduire la lame la plug large de la borne correspondante de la prise et poussre jusqu'au fond.

FOR EUROPE AND AUSTRALIA

230 V/240 V

FOR YOUR SAFETY

Units shipped to Australia are designed for operation on 240 V AC only.

To ensure safe operation, the three-pin plug supplied must be inserted only into a standard three-pin power point which is effectively earthed through the normal household wiring. Extension cords used with the equipment must be three-core and be correctly wired to provide connection to earth.

Improper extension cords are a major cause of fatalities. The fact that the equipment operates satisfactorily does not imply that the power point is earthed and that the installation is completely safe. For your safety, if in any doubt about the effective earthing of the power point, consult a qualified electrician.

PAN-EUROPEAN UNIFIED VOLTAGE

All units are suitable for use on supplies 230-240 V AC.

FOR OTHER COUNTRIES

115 V/230 V

FOR YOUR SAFETY

Units shipped to countries other than the above countries are equipped with an AC voltage selector switch on the rear panel. Refer to the following paragraph for the proper setting of this switch.

AC VOLTAGE SELECTION

This unit operates on 115-230 V AC. The AC voltage selector switch on the rear panel is set to the voltage that prevails in the area to which the unit is shipped. Before connecting the power cord to your AC outlet, make sure that the setting position of this switch matches your line voltage. If not, it must be set to your voltage in accordance with the following direction.

AC voltage selector switch

AC 230 V

 

 

 

AC 115 V

 

 

Move switch lever to match your line voltage with a small screwdriver or other pointed tool.

ENGLISH

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents CDC-690T Introduction Read this Before Operating For Your SafetyContents Model NO. CDC-690T Rear Panel ConnectionsRemote Controls Front Panel & Remote ControlsPress this button to play tracks on CDs in random sequence This receives the signals from the remote controlLoad a compact disc on the disc tray Press this button to open or close the disc trayFluorescent Display Polarity Remote Control Operation RangeBefore Operation To stop play Turn the power on Load the discs and close the disc trayIndicator lights up when the number of tracks is OperationsSearching for a passage during play Changing Discs DuringSkip and Search Play Selecting a discPlaying the First 10 Seconds of Each Track Playing Tracks in Random SequencePlay Repeat PlayRepeating a single track during play Repeating a specific passage duringProgramming the tracks on the CDs Stop mode, enter the program modeSelect the desired disc Example When selecting the disc Playing Tracks in ANY SequenceRectifying any wrong programmed selection Checking the programmed selectionsFind the desired selection and clear it in the program mode Clearing the programmed selectionsOpening the disc tray clears all programmed selections, too Tracks to be recorded Stop mode, select the auto edit ModeEditing for Recording Making auto editMaking manual edit Stop mode, select the manual edit ModeSelecting a Brightness Checking the edited tracksClearing all edited tracks Selected track is deleted automatically without Deleted PlayIf the DELETE/REVIEW button is pressed without Selecting a track, the selected disc is deleted as aChecking the deleted selections Recovering the deleted selectionsFind the desired track and recover it in the delete mode Opening the disc tray recovers all deleted selections, tooSelecting a Time Display Using the HeadphonesProblem Possible Cause Remedy Troubleshooting GuideSpecifications 5707-04725-009-0
Top Page Image Contents