Optimus - Katadyn Products Inc MODEL 110/MODEL 60 Servicing Your VCR, Cleaning the Video Heads

16-547.fm Page 35 Tuesday, July 20, 1999 4:45 PM

Servicing Your VCR

There are no user-serviceable parts inside your VCR. If you encounter a problem that you can- not correct using this manual and its trouble- shooting guide, take the VCR to your local RadioShack store for assistance.

Cleaning the Video Heads

Dirty video heads can cause the playback pic- ture to become blurred even though the audio signal is clear. Video head cleaning kits are available from your local RadioShack store. Clean the heads only when picture quality is af- fected.

Serious problems require cleaning by a trained technician. For more head cleaning informa- tion, contact your local RadioShack store.

Storing Your Video Cassettes

Unless you are making an automatic timer re- cording, eject and store the cassette before you turn off the VCR. This helps protect the cassette and the VCR’s internal mechanisms.

Place your video cassettes in their protective boxes and store them in a cool, dry, dust-free environment. Store the cassettes on end, not on their sides, to prevent improper settling of the cassette’s spools.

Note: Tape can become wound too tightly around the cassette’s spools after many play- ings. This can make the cassette improperly load and automatically eject when you insert it. On most cassettes there is a brake-release plunger on the bottom center of the cassette. Use the tip of a pen or pencil to press the plunger. This loosens the tape.

35