Optimus - Katadyn Products Inc MODEL 110/MODEL 60 owner manual VCR Setup, Setting the 3 CH Switch

Page 13

16-547.fm Page 13 Tuesday, July 20, 1999 4:45 PM

VCR SETUP

SETTING THE 3 CH. 4 SWITCH

If you connected the VCR’s OUT TO TV termi- nal to a TV or another VCR, set the VCR’s 3 CH. 4 switch (on the back of the VCR) to 3 or 4, whichever is not an active channel in your area.

When VCR appears on the display, the VCR sends the signal from the video source con- nected to its IN FROM ANTENNA or AUDIO 1/ VIDEO 1 IN (or AV2 for the Model 60) terminals to the TV on the channel you selected.

Note: The 3 CH. 4 switch has no effect on the TV when the VCR is off or if you connected a TV with separate audio/video input jacks to the VCR’s AUDIO 1/VIDEO 1 OUT jacks.

1.Press the tab on the battery compartment cover and lift off the cover in the direction of the arrow.

2.Put fresh batteries in the compartment, as indicated by the polarity symbols (+ and –) marked inside.

REMOTE CONTROL

Installing the Batteries

The remote control requires two AA batteries (not supplied). For the longest operation and best performance, we recommend alkaline bat- teries (such as RadioShack Cat. No. 23-557).

Cautions:

•Use only fresh batteries of the required size and type.

•Never leave dead or weak batteries in the remote control. Batteries can leak chemi- cals that can damage your remote control.

•Dispose of dead batteries promptly and properly; do not bury or burn them.

3. Replace the cover.

Note: If the remote control does not work or operates poorly, replace both batteries.

Using the Remote Control

To use the remote control, aim it at the front of the VCR and press the desired function but- tons.

13

Image 13

Contents Model 110/MODEL Important Safety Instructions Do not Open Tuning FeaturesRECORDING/PLAYBACK Tape ControlMultichannel Television Sound MTS Mod Other FeaturesContents Using this Manual AccessoriesBefore YOU Begin Moisture CondensationCommon Connections InstallationVCR Model 60 ConnectionsModel 110 Connections Catv Home Theater Connections Model 60 onlyCamcorder Connections Model 60 only Connecting PowerSetting the 3 CH Switch VCR SetupRemote Control Installing the BatteriesSetting the On-Screen Language/ Channels/Clock Initial SET UPHighlight Cable BOX VCR TV, then press SET 1996 FRI 130PM Manually Setting the ClockReprogramming Tuner Memory Adding/Erasing ChannelsTurning On Auto Clock Set Changing the On-Screen Language Resetting the VCR’s MemoryRCA Setting the Remote CONTROL’S CodesFm Page 20 Tuesday, July 20, 1999 445 PM Using the VCR’s Tuner Using the TV’s TunerOperation Watching TVLoading a Video Tape Viewing a Video TapePlaying a Video Tape Special Displays Special FunctionsTape Motion Controls REAL-TIME Counter Repeat Play Manually Adjusting TrackingTracking Digital Auto Tracking SystemRecording Speeds RecordingErase Protection Tape SelectionRECEIVING/RECORDING STEREO/SAP Broadcasts Model 60 only Selecting the Signal to RecordRecording a Program As You Watch It Immediate RecordingRecording One Program While You Watch Another Setting the Program Timer Automatic Timer RecordingTurn VCR OFF for Timer RECORD- ING Checking/Changing Program Timers Monitoring an Automatic Timer RecordingClearing a Program Timer AUDIO-ONLY Recording Model 60 only DubbingAdditional Information TroubleshootingCare and Maintenance Servicing Your VCR Cleaning the Video HeadsStoring Your Video Cassettes Specifications Frequency Response Regular Audio 80 Hz-10 kHz 80 Hz-5 kHz Fm Page 38 Tuesday, July 20, 1999 445 PM Fm Page 39 Tuesday, July 20, 1999 445 PM RadioShack