Adding/Erasing Channels
We recommend you check the channels the VCR automatically stored. It might have stored a distant, weak channel that you normally would not watch, or it might have missed a channel you want to store.
CHANNEL 08 DELE TED
or
ADDED
If the tuner stores a channel that you do not want, tune to that channel and press ADD/DLT. CHANNEL nn DELETED appears on the TV, and the unwanted channel is erased from the tuner’s memory.
If you want to program a weak channel that au- tomatic programming missed, enter the desired channel number using the remote control’s number buttons. Then press ADD/DLT. CHAN- NEL nn ADDED appears on the TV, and the channel is added to the memory.
Reprogramming Tuner Memory
You might want to reprogram the VCR’s tuner memory if you move or change from an anten- na connection to a cable TV connection.
Follow these steps to reprogram the tuner.
1.Press MENU to display the main menu.
2.Use SEL s/t to highlight SET UP CHAN- NEL, then press SET.
– – – – – – – MENU – – – – – – –
SET UP VCR
SET CLOCK
SET UP CHANNEL
IDIOMA/LANGUE
(ENGLISH)
SELECT | : | PUSH SELECT / |
SET | : | PUSH SET KEY |
END | : | PUSH MENU KEY |
3.Press SET to select the broadcast system, either TV or CATV.
SET UP CHANNEL
ANTENNA SYSTEM : CATV
AUTO SET
SELECT | : | PUSH SELECT / |
SET | : | PUSH SET KEY |
END | : | PUSH MENU KEY |
4.Press SEL t to highlight AUTO SET, then press SET. The VCR starts scanning for and storing active channels.
Note: To exit the programming mode, press MENU at any time.
Turning On Auto Clock Set
If you manually set the VCR’s clock, then find that EDS is available in your area, you can turn on the auto clock set feature. This ensures that the VCR sets itself to the correct time after a power failure of less than 24 hours.
1.Press MENU to display the main menu.
2.Use SEL s/t to highlight SET CLOCK, then press SET.
3.Use SEL s/t to highlight AUTO SET, then press SET.
– – – – – SET CLOCK – – – – –
| AUTO SET |
|
| MANUAL SET | |
SELECT : PUSH SELECT / | ||
SET | : PUSH SET KEY | |
END | : PUSH MENU KEY |
4.Follow Step 6 under “Setting the On- Screen Language/Channels/Clock” on Page 14.
17