Sherwood VD-4502 manual Connecting to TV with Scart ConnectorRegional Option, Digital connection

System Connections

Connecting to TV with SCART Connector(Regional Option)

For some countries like Europe, the unit incorporates the A/V SCART OUTPUT connector.

You can connect the unit to TV easily using the SCART connections without other cumbersome audio and video connections.

During operation of the unit, this connector can deliver either the composite(regular) video or RGB video signals.

Note:

In this connection, do not connect the unit to the TV through a VCR. Otherwise the image may be disturbed due to the copy protection function.

Connecting to A/V Amplifier or Receiver

(To enjoy the sound advantage of the DVD Player)

Although you can reproduce the DVD Player’s sound from the TV speakers with the connections on pages 14, connecting with an amplifier provides you high quality dynamic sounds.

To reproduce Dolby Digital surround and DTS surround sound, you need to connect to an amplifier with a Dolby Digital and DTS decoder respectively.

■ Digital connection ■ Analog connection

If your amplifier has a digital input jack, be sure to connect it to either DIGITAL OUTPUT OPTICAL or COAXIAL jack on the DVD player.

Note

In the Digital Out setting, you can select whether the VD-4502 will output the PCM signal only or the PCM and other signals, or no digital signals at all.

If your amplifier has no digital audio input, make the analog connection.

15