Sylvania DVC800CC owner manual For TVs with Component Video in Jacks

Page 15

FOR TVs WITH COMPONENT VIDEO IN JACKS

Use a component video cable (commercially available) in place of the yellow video cable to enjoy higher qual- ity pictures.

The component video connection only supplies video (picture) in the DVD mode of the DVD/VCR. Therefore, in order to use the VCR features or view TV channels at the DVD/VCR, you still need to either connect the RF coax- ial cable between the ANT-OUT jack of the DVD/VCR and the TV’s Antenna In jack, or connect the yellow video cable as described earlier (Fig. 1). To connect the supplied RF coaxial cable, see “DVD/VCR TO TV CONNEC- TION” on page 14.

A/V-compatible

or wide screen TV

To COMPONENT VIDEO

INPUT jacks

To COMPONENT VIDEO

To Right (red) and Left (white)OUT jacks AUDIO INPUT jacks

To Right (red) and Left (white)

AUDIO OUTPUT jacks

		DVD/VCR	COMPONENT
		OUT	COMPONENT
		IN	VIDEO OUT
ANT - IN	L		Y
	L	DVD/VCR	Y
	AUDO	AUDIO OUT
	AUDO				DIGITAL AUDIO OUT
	R	L	Cb	S-VIDEO	DIGITAL AUDIO OUT
		L		S-VIDEO	PCM / BITSTREAM
				OUT	PCM / BITSTREAM
ANT - OUT					COAXIAL
CH3 CH4	VIDEO	R	Cr

[Fig. 3]

CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL

INPUT JACKS SUCH AS MD DECK OR DAT DECK

Use an audio coaxial digital cables (not included) for the audio connections.

Connecting to an amplifier equipped with digital input jacks such as MD Deck or DAT Deck.

Amplifier equipped with digital

input jacks, MD deck, DAT deck, etc.

	DVD/VCR		COMPONENT
	OUT		COMPONENT
	IN		VIDEO OUT
ANT - IN	L		Y
	L	DVD/VCR	Y
	AUDO	AUDIO OUT
	AUDO			DIGITAL AUDIO OUT
	R	L	Cb S-VIDEO	DIGITAL AUDIO OUT
	R	L	Cb S-VIDEO
			OUT PCM / BITSTREAM
ANT - OUT				COAXIAL
CH3 CH4	VIDEO	R	Cr
CH3 CH4

To COAXIAL DIGITAL

To COAXIAL DIGITAL AUDIO OUT jack

Notes

AUDIO INPUT jack

[Fig. 4]

¡The audio source on a disc in the 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD or DAT deck.

¡Be sure to turn off the power to all components in the system before connecting another component. ¡Refer to the Owner’s Manuals for the components to be connected to the DVD/VCR.

¡Set Dolby Digital and DTS to off for audio output in the setup mode. Playing a DVD disc using incorrect set- tings may generate noise distortion, and may also damage the speakers. (See page 36 to set Dolby Digital and DTS to on)

– 15 –

EN

1L25

Image 15

Contents DVC800CC Laser Safety Important Safeguards Refers to playback of video cassette tapes Supplied AccessoriesSymbols Used in this Manual About CopyrightTable of Contents DVD Mode FeaturesMoisture Condensation Warning PrecautionsInstallation Location Avoid the Hazards of Electrical Shock and FireFollowing discs cannot be played back on this DVD/VCR About the DiscsPlayable Discs ExampleOperating Controls and Functions Press to turn the power on and offLights up when the power is on Lights up when a cassette is in the DVD/VCR+100 button Press to select a desired audio language or sound mode Press to reset the settingPress to accept a setting Press to select VCR mode for the remote controlSet to channel 3 or 4 to use your TV with your DVD/VCR DisplayDisplays During Operation Loading the BatteriesSwitching to VCR Mode Switching to DVD Mode VCR/DVD SwitchingIf your TV does not have A/V terminals SwitchConnecting to a TV DVD/VCR to TV ConnectionFor TVs with Component Video in Jacks Dolby Digital DTS decoder Automatic Channel SET UP To Preset the Channels AgainTo Select a Desired Channel ¡To go back one step, press the REW button Clock SET UPTo Change the ON-SCREEN Language To ADD/DELETE ChannelsAuto Repeat Playback Playback FunctionNormal Playback Search FunctionsAccidental Erasure Prevention Timer RecordingRecording Function Viewing and Recording Same ProgramAutomatic Timer Program Hints for TimerTo Stop AN Automatic Timer PRO To CHECK, CORRECT, or Cancel ANDisplay button on Status will appear when you press StopCopying a Video Tape To Monitor the RecordingPlaying a DVD Video Or AN Audio CD Using the DVD MenusPlaying a Disc Auto RewindStepping Through Frames Using the Title MenuPausing Playback or Displaying a Still Picture Resuming Playback from Point Where Playback StoppedPlaying from a Desired Title or a Chapter Fast FORWARD/REVERSESlow Motion Starting from a Desired TrackCall back the marker Starting from a Desired Time CountMarker Set the marker¡The selected section will be Played back repeatedly RepeatYou can define a section to be played back repeatedly ¡The starting point a will then be Repeat SelectedTo Clear the Program Zoom PlaybackWhen a Track is selected When an Album is selectedPlaying AN MP3 Disc Playing a Desired Track From AN MP3 Disc Playing AN MP3 Disc in a ProgramPlaying AN MP3 Disc Randomly Settings Changing the Audio Language or Sound Mode¡The current audio status will appear at the top Changing the Camera Changing the Subtitle LanguageChanging the ON-SCREEN Display Black Level SettingsLanguage Settings Changing the Setup ItemsAuto Power OFF Default on Display SettingsWhen playing a disc with copyright protection Audio SettingsParental Lock All parental lock is cancelledLanguage Country code Language Code ListProblem Corrective Action Troubleshooting GuideDisc Handling Handling PrecautionsSpecifications Phone 905 FAX 905 0VMN03029 H9226CD Alden RoadMarkham, Ontario L3R 4C1