Sylvania DVC800CC owner manual Playing a Disc, Auto Rewind, Playing a DVD Video Or AN Audio CD

Page 23

AUTO REWIND

REAL TIME TAPE COUNTER

When a tape reaches the end during recording, play- back, or fast-forward, the tape will automatically rewind to the beginning. After rewinding finishes, the DVD/VCR will eject the tape.

¡The DVD/VCR will not rewind the tape automati- cally during timer recording or One Touch Recording.

¡This shows the elapsed recording or playback time in hours, minutes, and seconds. (The displayed time will not change during blank portions of the tape.)

¡The indication will appear when the tape is rewound further than “0:00:00” on the tape counter.

PLAYING A DISC

PLAYING A DVD VIDEO

OR AN AUDIO CD

DVD CD

Getting started

Turn on the power of the TV, amplifier and any other components which are connected to the DVD/VCR. (Change the input system to suite the DVD/VCR, and check that the sound volume is correct).

1Press the POWER button.

¡The power will turn on.

Check that the DVD OUTPUT Light is lit. If not press the DVD button on the remote control to switch to DVD/VCR mode.

2Press the OPEN/CLOSE button.

¡The disc loading tray will open.

3Place a disc into the tray.

¡Make sure the disc is sitting properly in the correct recess, with the label side up.

Notes

¡A “prohibited icon” may appear at the top-right on the TV screen during operation, warning that a prohibited operation has been encountered by the DVD/VCR or the disc.

¡If a disc is dirty or has scratches, the pictures may appear distorted and the playback operation may stop. In such cases, clean the disc and unplug the power cord and then plug it again before resuming playback.

¡With DVDs that use titles for playback program signals, playback may start from the second title, or it may skip these titles.

¡During the playback of a two layered disc, pictures may stop for a moment. This happens when the 1st layer switches to the 2nd layer. This is not a mal- function.

USING THE DVD MENUS

DVD

Some DVDs contain their own menus, such as a guid- ance menu which describes the contents of the disc or a selection menu for sound, language and other cus- tomized settings.

4Press the PLAY button.

¡The tray will close automatically, and playback will then start from the first chapter or track of the disc. You need to press the PLAY button only when the tray has been closed by pressing the OPEN/CLOSE button.

¡If your DVD has a title menu, it may appear on the screen. In this case, refer to “USING THE DVD MENUS” in the next section, or “USING THE TITLE MENU” on page 24.

1Press the MENU button.

¡The DVD menu will appear.

2Select the desired title.

¡Press the arrow buttons (L/K/B/s) to change the setting, and then press the ENTER button.

3Playback will start from the selected title.

5Press the STOP button to stop play.

– 23 –

EN

1L25

Page 22 Page 24
Image 23
Page 22 Page 24
Contents DVC800CC Laser Safety Important Safeguards Refers to playback of video cassette tapes Supplied AccessoriesSymbols Used in this Manual About CopyrightTable of Contents DVD Mode FeaturesMoisture Condensation Warning PrecautionsInstallation Location Avoid the Hazards of Electrical Shock and FireFollowing discs cannot be played back on this DVD/VCR About the DiscsPlayable Discs ExampleOperating Controls and Functions Press to turn the power on and offLights up when the power is on Lights up when a cassette is in the DVD/VCR+100 button Press to select a desired audio language or sound mode Press to reset the settingPress to accept a setting Press to select VCR mode for the remote controlSet to channel 3 or 4 to use your TV with your DVD/VCR DisplayDisplays During Operation Loading the BatteriesSwitching to VCR Mode Switching to DVD Mode VCR/DVD SwitchingIf your TV does not have A/V terminals SwitchConnecting to a TV DVD/VCR to TV ConnectionFor TVs with Component Video in Jacks Dolby Digital DTS decoder To Select a Desired Channel Automatic Channel SET UPTo Preset the Channels Again ¡To go back one step, press the REW button Clock SET UPTo Change the ON-SCREEN Language To ADD/DELETE ChannelsAuto Repeat Playback Playback FunctionNormal Playback Search FunctionsAccidental Erasure Prevention Timer RecordingRecording Function Viewing and Recording Same ProgramAutomatic Timer Program Hints for TimerTo Stop AN Automatic Timer PRO To CHECK, CORRECT, or Cancel ANDisplay button on Status will appear when you press StopCopying a Video Tape To Monitor the RecordingPlaying a DVD Video Or AN Audio CD Using the DVD MenusPlaying a Disc Auto RewindStepping Through Frames Using the Title MenuPausing Playback or Displaying a Still Picture Resuming Playback from Point Where Playback StoppedPlaying from a Desired Title or a Chapter Fast FORWARD/REVERSESlow Motion Starting from a Desired TrackCall back the marker Starting from a Desired Time CountMarker Set the marker¡The selected section will be Played back repeatedly RepeatYou can define a section to be played back repeatedly ¡The starting point a will then be Repeat SelectedTo Clear the Program Zoom PlaybackPlaying AN MP3 Disc When a Track is selectedWhen an Album is selected Playing AN MP3 Disc Randomly Playing a Desired Track From AN MP3 DiscPlaying AN MP3 Disc in a Program ¡The current audio status will appear at the top SettingsChanging the Audio Language or Sound Mode Changing the Camera Changing the Subtitle LanguageChanging the ON-SCREEN Display Black Level SettingsLanguage Settings Changing the Setup ItemsAuto Power OFF Default on Display SettingsWhen playing a disc with copyright protection Audio SettingsParental Lock All parental lock is cancelledLanguage Country code Language Code ListProblem Corrective Action Troubleshooting GuideDisc Handling Handling PrecautionsSpecifications Phone 905 FAX 905 0VMN03029 H9226CD Alden RoadMarkham, Ontario L3R 4C1
Top Page Image Contents