SPECIAL FEATURES
COPYING A VIDEO TAPE
VCR
You can make copies of video tapes made by friends or relatives for your enjoyment.
Warning:
Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws.
Connect the recording DVD/VCR (this unit), the play- ing VCR (another source) and your TV using the fol- lowing diagram.
¡You can use the AUDIO/VIDEO input jacks on the front panel of the DVD/VCR instead of using the jacks on the back.
[Recording VCR]
(this unit)
|
| DVD/VCR |
|
|
|
|
| OUT | COMPONENT |
|
|
|
| IN | VIDEO OUT |
|
|
ANT - IN | L |
| Y |
|
|
| DVD/VCR |
|
| ||
|
| AUDIO OUT |
|
| |
| R | L | Cr | DIGITAL AUDIO OUT | |
|
| OUT PCM / BITSTREAM | |||
ANT - OUT |
|
|
|
| COAXIAL |
3CH 4CH | VIDEO | R | Cb |
|
|
Coaxial cable | Audio/Video cables |
(supplied) | (not supplied) |
[TV set] |
|
(Use for monitoring) |
|
| OUT |
| LEFT RIGHT |
| IN |
| AUDIO VIDEO |
| [Playing VCR] |
ANT in | (another source) |
1Insert a
2Insert a tape with a safety tab into the recording VCR.
3Press the SPEED button on the recording VCR to select the desired recording speed (SP/SLP).
¡When you use the A/V input jacks on the back of the DVD/VCR, select "L1" position by pressing [0], [0], [1] on the remote control or the CHANNEL(o/p) buttons.
¡When you use the A/V input jacks on the front of the DVD/VCR, select "L2" position by pressing [0], [0], [2] on the remote control or the CHANNEL(o/p) buttons.
Note
“L1” and “L2” are found before the lowest memo- rized channel. (Example: CH2)
4Press the REC/OTR button on the recording VCR.
5Begin playback of the tape in the playing VCR.
¡For best results during dubbing, use the DVD/VCR’s front panel controls whenever possi- ble. The remote control might affect the playing DVD/VCR’s operation.
¡Always use
¡You can use a video disc player, satellite receiver, or other audio/video component with A/V outputs in place of the playing VCR.
TO MONITOR THE RECORDING
1Turn on the TV and set the TV to channel 3 or 4.
¡Now set the CH3/CH4 switch on the back of the DVD /VCR to match the channel selected on the TV.
2Press the VCR/TV button on the recording VCR so that the VCR/TV Light comes on.
MTS (Multi-Channel Television
Sound) SYSTEM
VCR
When you play a VHS tape, or receive a broadcast on the DVD/VCR tuner channel you are watching, the current
status will appear when you press STOP |
| 12:00AM |
|
|
| ||
the DISPLAY button on the |
|
| CH 32 |
| 1)* | ||
|
| STEREO |
| ||||
|
| SAP |
| ||||
remote control. When you record a |
|
|
|
|
|
|
|
MTS broadcast signal, you need to |
|
|
|
|
|
| 2)* |
set it to MTS mode. | SP | 0:00:00 HIFI |
|
| |||
|
| ||||||
|
|
|
|
|
|
| |
1)* When a program is broadcast in stereo, STEREO appears. When a program is broadcast in second audio, SAP appears.
¡Although a program may be broadcast in both stereo and sub audio, you must select the Recording mode to TV STEREO or SAP before you record a broadcast.
2)* While the VCR is set in HiFi stereo mode, HiFi appears on the TV screen. While the VCR is set in monaural (MONO) mode, HiFi disappears from the TV screen.
¡If you play
MTS RECORDING/MONITOR MODE
Type of | Display on the | STEREO/SAP | Normal audio | |||
broadcast | TV screen | Selection | track | |||
Regular |
|
| ||||
(monaural audio) | Mono | Mono | Mono | |||
|
| |||||
|
|
|
|
|
| |
Stereo | STEREO | L | R | L+R | ||
broadcast |
|
|
|
|
| |
Bilingual | SAP | TV STEREO* | Main audio | Main audio | Main audio | |
|
| program | program | program | ||
broadcast |
|
|
|
|
| |
| SAP* | Sub audio | Sub audio | Sub audio | ||
|
| |||||
|
|
| program | program | program | |
Stereo & | STEREO | TV STEREO* | L | R | L+R | |
Bilingual | SAP | SAP* | Sub audio | Sub audio | Sub audio | |
broadcast |
|
| program | program | program | |
*
– 22 – | EN |
1L25