Basic Operation
Basic Playback
Preparation before playing:
1.Connect your DVD player to the TV and amplifier.
2.Turn on the TV.
3.Set the TV to the AV input connected to the DVD Player.
4.Turn down the volume on your amplifier, then power it on.
5.Set the amplifier to the AV input connected to the DVD Player.
Step 1 - Press the POWER switch, the player will start. Then "LOAD" is illuminated on the display and the logo is displayed on TV screen.
Step 2 - Press OPEN/CLOSE on front panel or remote control. The player displays "OPEN" on the display. When the tray is open, place the disc on the tray, with the label side up. Press OPEN/CLOSE again to close the disc tray.
Step 3 - Press the PLAY button on the front panel or remote control. The player will automatically read and identify the disc, display the type and total time, and begin playback.
13