Korg owner manual D3200’s Transport controls are shown as follows, Meter key, CH View Key

Page 3

D3200 EasyStart

!The default setting is MATCH. Holding down the JUMP/MATCH key while adjusting a knob or fader temporarily switches to JUMP operation.

Settings for the ClickPoint cursor speed and Knob/fader “Jump/Match” settings can be made in the SYSTEM menu. Press the SYSTEM MIDI key to the right of the display, click the “Control” tab in the display then make your selections.

The D3200’s Transport controls are shown as follows:

[ ] = RECORD [ ] = PLAY [ ] = STOP [ ] = REWIND [ ] = FAST FORWARD

Modes and Features Tour

1.First, load the demo song: Press the SONG key, and then click the “ ” popup button in the display, next to

the current song name > Select “001: I’d Be A Fool”, and then click “OK”.

2.Click “Copy” in the display then click “Yes” and “OK” when completed.

3.Now to un-protect the copied demo song: Click “Protect” > Click “OFF”, and then click “OK”. Note that the rest of the song edit functions are now visible and accessible in the display.

4. Press the [ ] key to start playback of the demo song. Slowly raise the MONITOR or PHONES level knob to a comfortable listening position.

The [METER] key

The Meter Track View displays regions of audio, levels for playback tracks, effects, output levels as well as the currently selected virtual tracks, track names and locate points.

As the song continues to play…

1.Press the METER key located to the left of the top row of Matrix Knobs.

2.You can change this view to display CH-Input, Pre or Post Fader meter levels, and also select your choice of Track or Fader views. Try it: Click the “ ” popup button in the upper left corner of the display > under Select View: click “FaderView”, and then click “OK”. Now you’re viewing meter levels in addition to the Fader and Pan settings for the song! To view tracks 17-32, press the 17-32channel selection key (above channel 13 fader).

The [CH VIEW] Key

This screen displays the settings and status of a single channel. Level, pan, effects, EQ, etc. are all accessible on one page!

1. Press the [ ] key to stop song playback.

2.Press the CH VIEW key (located to the left of the Knob Matrix) > Select different channels by pressings the channel keys above the faders (the selected channel key lights yellow), or click the “CH” in the upper left corner of the display and use the DIAL or + and - keys to change channels. The Knob Matrix is active here for control of the selected channel’s Effect send levels and EQ. Try it.!

3.Press the TAB PAGE>/YES key to view the “Ch Routing” tab. Here you can view the signal flow for the selected channel.

3

Image 3
Contents EasyStart EasyStart ContentsKnob Matrix Few words on ClickPoint…D3200’s Transport controls are shown as follows Meter keyCH View Key Track & Scrub keys Scene Automation The Scene keyRecording Automation on a track Effect & EQ Keys Mixer KeySession Drums Key Create a new song Assign an inputAssign effects and EQ to the input Mixdown and master your song Build a drum track with Session DrumsCreate an audio CD of your song Backup your data to computer using USBD3200 Shortcut Keys
Related manuals
Manual 200 pages 25.49 Kb