FUNAI ZC350MS8 owner manual Hints for Timer Recording, Priority of Overlapped Settings

Page 38

TIMER RECORDING

Hints for Timer Recording

•If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer programming will be lost.

•If a disc is not inserted, TIMER REC indicator flashes and timer recording cannot be performed. In some cases, TIMER REC indicator will light up momentarily around the start point as the unit attempts to record. Please insert a recordable disc.

•When all the timer recording is completed, TIMER REC indicator flashes. To play back or eject the recorded disc, press [STANDBY-ONy] first, then select the recorded title and press [PLAY B], or [OPEN/CLOSE A] to remove the disc.

•During timer recording or timer standby mode (TIMER REC indicator will light up), any operations on the unit will not be available. To make these operations available, press [STOP C] on the front panel to cancel the timer recording or [STANDBY-ONy] to release timer standby mode (TIMER REC indicator will light off).

•To cancel the timer standby mode, press [STANDBY-ONy].

•When the starting and the ending time are the same, the length of the recording will be set for 24 hours. When the disc becomes full during the recording, the unit turns itself off.

•When the programmed starting and ending time are earlier than the current time, the setting will not be accepted and be cleared for redoing.

•If the starting time is earlier and the ending time is later than the current time, the recording will start right after you turn the power off.

•The timer recording for digital TV cannot record any audio language other than English.

The Priority of Overlapped Settings

•Timer program which has the earlier start time will be placed first in the timer program list, and be given priority over the programs with the later start time when timer programs overlap.

•When timer programs overlap, the first 2 minutes (at the longest) of the later recording will be cut off.

•When two or more timer programs have the same start time, the program set first will be given priority.

•A timer recording of lower priority will be canceled or start from the middle.

•Check the overlapped timer programmings and change the priority if necessary.

When the starting time is the same:

A program set previously (PROG. A) has priority.

PROG. A

PROG. B

actual recording

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PROG. A

 

 

PROG. B

 

 

 

 

The first 2 minutes (at the longest) will be cut off.

Note for DVD recording

•When the recording time of 2 programs are overlapped, or the end time of a program and the start time of another program is the same, the first 2 minutes (at the longest) of the subsequent program will be cut off.

•If the cut-off portion comes up to 3 minute or more, this program will be displayed with error number E40 in the timer programming list.

When the end time of the programming currently being recorded and the start time of the subsequent program are same:

The beginning of the PROG. B may be cut off.

PROG. A

 

 

PROG. B

 

 

actual

PROG. A

PROG. B

recording

 

 

The first 2 minutes (at the longest) will be cut off.

38 EN

E7H51UD.indd 38

2007/02/19 18:23:35

Page 37 Page 39
Image 38
Page 37 Page 39
Contents ZC350MS8 Make your contribution to the environment PrecautionsLaser Safety Important Safeguards PrecautionsAvoid the Hazards of Electrical Shock and Fire Installation LocationSupplied Accessories Moisture Condensation WarningCleaning discs Maintenance ServicingCleaning the cabinet Cleaning the disc lens Disc handlingContents Features 14 13 Functional OverviewFront Panel Introduction Connections Functional OverviewRear Panel Using a Remote Control Remote ControlInstalling the Batteries in the Remote Control Open the cover Insert batteriesREC Mode button Confirm button Analog modeDigital mode Setup buttonAntenna Cable Connection Supplied cables used in this connection are as followsPlug in the power cords of the devices to the AC outlet RF Modulator ConnectionWith this setup Connection to a Cable / Satellite BOXConnection to a TV This unitConnection to AN Audio System AudioDisplays title/file name On-Screen Display / MenuFile Name Information Guide to ON-SCREEN Displays and Menus Main MenuInitial Setting Proceed to in Manual Clock Setting onWhen scanning is over, press Setup to exit Channel SettingUse K / L to select Auto Channel Preset, then press OK Auto Channel ScanInstructions continue on the next Channel SettingAdding / Deleting Channels Select the channel number to delete Press Setup to exitSelect the channel number to add or delete Use K / L to select Add or Delete, then press OKUse K / L to select Auto Clock Setting, then press OK Setting the ClockAuto Clock Setting Press Setup to exit Press STANDBY-ON y to turn off the unitDaylight Saving Time Setting the ClockManual Clock Setting Use K / L to select Clock, then press OKChannel Selection Tuner SettingsSwitching Analog Mode Digital Mode Tuner Settings Selecting TV AudioOutputs main-audio Selecting TV Audio cont’dUse K / L to select TV Audio Select, then press OK Broadcast Disc AudioDTV Closed Caption Select if you do not want DTV CC. This is the defaultService 1 to Service Use K / L to the desired DTV closed caption, then press OKGeneral Setting menu will appear Press Setup and use K / L toSelect General Setting, then press Closed Caption StyleEdge Type Font SizeFont Style Font OpacityRecordable Discs Recording ModeInformation on DVD Recording Unrecordable DiscsPress Setup to exit Setting for Auto ChapterPress Setup and use K / L to select General Before RecordingPress OPEN/CLOSE a to close the disc tray Press REC Mode to select a recording modePress STANDBY-ON y Desired channel to recordBasic Recording & ONE-TOUCH Timer Recording Press Stop C to exit the title listUse K / L to enter the date, then press B Timer RecordingPress Timer Use K / L to select New Program, then press OK External input mode Timer RecordingUse K / L to select a recording mode TimePress Timer Check the information on the list you will need To stop the timer recording in processHow to select a channel number for the timer recording Press STANDBY-ON yHints for Timer Recording Priority of Overlapped SettingsOverwriting in the Middle of the Title Overwriting Unnecessary TitleOverwriting from the Beginning of the Title Overwrite recording a Existing title B After overwriting Overwriting Unnecessary TitleHints for Overwriting Overwrite recording a Existing title B Existing title CUse K / L to select Video Input, then press OK Settings for AN External DeviceConnection to an External Device External deviceSettings for AN External Device Recording from an External DeviceUse K / L to select Yes, then press OK Setting a Disc to ProtectTo cancel the disc protect Use K / L to select Finalize, then press OK Press Setup Use K / L to select Disc Edit, then press OKFinalizing a Disc Finalizing is completedPlaying the Discs in Other DVD Players Auto FinalizingUnplayable Discs Information on PlaybackPlayable Discs and Files Color SystemsPBC playback control for Video CD CD Playback Mode menu will appearInformation on Playback Hint for DVD PlaybackPress Play B to start playback Basic PlaybackDirect Playback Press Stop C once to stop playback temporarilyBasic Playback Playback from the Title ListPress Stop C once to stop playback Use K / L to select a desired titleThen press OK Use K / L to select Play, thenPlayback Playing Back an Audio CD and a CD-RW/-R with MP3 FilesFollow steps 1 to 2 in Direct Playback on During playback, press Pause F Using the Title / Disc MenuPause Playback will be paused and sound will be mutedFast Forward / Fast Reverse Playback Special PlaybackResume Playback Skipping TV Commercials During PlaybackStep by Step Playback Special PlaybackRapid Playback Slow Forward / Slow Reverse PlaybackDVD-video Marker SettingZoom Search Using H / GUsing Display Title / Chapter SearchAudio CD SearchTime Search Random Playback Repeat / Random / Program PlaybackRepeat Playback You can program the disc to play back in your desired order Repeat / Random / Program PlaybackProgram Playback Repeat this step until you program all the desired tracksFor DVD-video Audio soundtrack will switch Switching SubtitlesSwitching Audio Soundtrack Selecting the Format of Audio and Video Switching Virtual Surround SystemSwitching Camera Angles Reducing Block NoiseEditing Discs Information on Disc EditingGuide to a Title List Press TitlePress Title Editing DiscsDeleting Titles Use K / L to select Edit, thenUse K / L to select Edit Title Editing DiscsPutting Names on Titles After this operation is completed, press Return to exitUse K / L to select Chapter Mark, then press OK Setting Chapter MarksTitles on page 63 to display Edit menu Use K / L to select Add, then press OKClearing Chapter Marks Selected chapter mark will be deletedAll chapter marks will be deleted Clearing Chapter Marks cont’dTo delete all chapter marks Hiding Chapters Setting Pictures for Thumbnails You can set your desired scene as a thumbnail for each titleTitle will be divided into 2 new titles Dividing a TitleYou can divide one title into 2 new titles Putting Name on Disc Setting or Releasing Disc Protect Press Stop C if you are playing back a disc Erasing DiscYou can erase all titles on a disc Making Edits Compatible Use K / L to select Yes, then pressList of Settings ContentsList of Settings SettingPlayback Use the Number buttons to enter the current password SetupsParental Lock Default OFF Playback cont’dDisc Audio Subtitle Language Default OFF Disc Menu Language Default EnglishAudio Language Default Original Angle Icon Default onSelection menu will appear DisplayRefer to 1 to 4 on page 82 and set the selected item For 3 refer to pagesDisplay cont’d OSD Language Default EnglishScreen Saver Default 10 minutes ChipFor 3 refer to VideoRefer to 1 to 2 on page 84 and set the selected item Video cont’d Progressive Scan Default OFFTV Aspect Default 43 Letter Box Reset All Reset the setting to defaultRemote control TroubleshootingPower PictureTroubleshooting Recording / Timer recording / EditingOthers OPEN/CLOSE a to take out the disc. The disc canceled duringRepairing process MAY not work You press OPEN/CLOSE aError message Cause Solution Frequently Asked Questions Language Code Language CodeGlossary Recording SpecificationsGeneral TunerCódigos de Región EspañolDiscos Reproducibles Disco GrabableEspañol VHF / UHFArriba Presione STANDBY-ON yPresione OK para activar Ajste Manual de Reloj Presione REC I para iniciar la grabaciónNuevo, y luego presione OK Configure una programación delConfigurar una programación del TemporizadorMemo Memo 1VMN23563 Customer ServiceTel Plug in the power cords of the devices to the AC outlet Compatible before being able to see those effects on otherTo stop recording 2Press REC Mode to select a recording modeOr the Number
Top Page Image Contents