FUNAI ZC350MS8 Maintenance Servicing, Cleaning the cabinet, Cleaning discs, IR signal check

Page 5

PRECAUTIONS

Maintenance

Servicing

•Please refer to relevant topics on “TROUBLESHOOTING” on pages 86-90 before returning the product.

•If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power plug and please call our help line mentioned on the front page to locate an Authorized Service Center.

Cleaning the cabinet

•Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasive.

Cleaning discs

•When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do not wipe in a circular motion.

•Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analog records.

Cleaning the disc lens

•If this unit still does not perform properly although you refer to the relevant sections and to “TROUBLESHOOTING” in this owner's manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.

Disc handling

•Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.

•Always store the disc in its protective case when it is not used.

IR signal check

If the remote control does not work properly, you can test if the remote control sends out the infrared signal with AM radio or a digital camera (including built-in camera of cellular phone). It will help to define the cause of malfunction.

•With an AM radio:

Tune an AM radio to a station with no broadcasting. Press a button on remote control toward the radio. Sound will be fluttering when you press any key and the radio receives the signal. This means the remote control is working.

• With a digital camera (including built-in camera of cellular phone):

Direct a digital camera to remote control, press and hold a button on remote control. If infrared light appears through digital camera, the remote control is working.

Introduction Connections Basic Setup Recording Playback

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trade- marks of Dolby Laboratories.

Dolby Digital Recording

“Dolby® Digital Recording enables consumers to record high-quality video with stereo sound on recordable DVD discs. The technology, when utilized instead of PCM recording, also saves recordable disc space, allowing for higher video resolution or extended recording time on each DVD. DVDs created using Dolby Digital Recording will play back on all DVD-video players.”

Note: This is true when the players are compatible with actual recordable DVD discs.

© 2007 Funai Electric Co., Ltd.

All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or stored in any storage medium, in any form or for any purpose without the express prior written consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.

Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the obligation to notify any person or organization of such changes.

with the design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.

EN 5

Editing Function Setup Others

Español

E7H51UD.indd 5

2007/02/19 18:23:22

Page 4 Page 6
Image 5
Page 4 Page 6
Contents ZC350MS8 Make your contribution to the environment PrecautionsLaser Safety Precautions Important SafeguardsSupplied Accessories Installation LocationAvoid the Hazards of Electrical Shock and Fire Moisture Condensation WarningCleaning the cabinet Maintenance ServicingCleaning discs Cleaning the disc lens Disc handlingContents Features 14 13 Functional OverviewFront Panel Introduction Connections Functional OverviewRear Panel Installing the Batteries in the Remote Control Remote ControlUsing a Remote Control Open the cover Insert batteriesDigital mode Confirm button Analog modeREC Mode button Setup buttonSupplied cables used in this connection are as follows Antenna Cable ConnectionRF Modulator Connection Plug in the power cords of the devices to the AC outletConnection to a Cable / Satellite BOX With this setupThis unit Connection to a TVAudio Connection to AN Audio SystemDisplays title/file name On-Screen Display / MenuFile Name Information Main Menu Guide to ON-SCREEN Displays and MenusProceed to in Manual Clock Setting on Initial SettingUse K / L to select Auto Channel Preset, then press OK Channel SettingWhen scanning is over, press Setup to exit Auto Channel ScanInstructions continue on the next Channel SettingAdding / Deleting Channels Select the channel number to add or delete Press Setup to exitSelect the channel number to delete Use K / L to select Add or Delete, then press OKAuto Clock Setting Setting the ClockUse K / L to select Auto Clock Setting, then press OK Press Setup to exit Press STANDBY-ON y to turn off the unitManual Clock Setting Setting the ClockDaylight Saving Time Use K / L to select Clock, then press OKChannel Selection Tuner SettingsSwitching Analog Mode Digital Mode Selecting TV Audio Tuner SettingsUse K / L to select TV Audio Select, then press OK Selecting TV Audio cont’dOutputs main-audio Broadcast Disc AudioService 1 to Service Select if you do not want DTV CC. This is the defaultDTV Closed Caption Use K / L to the desired DTV closed caption, then press OKSelect General Setting, then press Press Setup and use K / L toGeneral Setting menu will appear Closed Caption StyleFont Style Font SizeEdge Type Font OpacityInformation on DVD Recording Recording ModeRecordable Discs Unrecordable DiscsPress Setup and use K / L to select General Setting for Auto ChapterPress Setup to exit Before RecordingPress STANDBY-ON y Press REC Mode to select a recording modePress OPEN/CLOSE a to close the disc tray Desired channel to recordPress Stop C to exit the title list Basic Recording & ONE-TOUCH Timer RecordingUse K / L to enter the date, then press B Timer RecordingPress Timer Use K / L to select New Program, then press OK Use K / L to select a recording mode Timer RecordingExternal input mode TimeHow to select a channel number for the timer recording To stop the timer recording in processPress Timer Check the information on the list you will need Press STANDBY-ON yPriority of Overlapped Settings Hints for Timer RecordingOverwriting in the Middle of the Title Overwriting Unnecessary TitleOverwriting from the Beginning of the Title Hints for Overwriting Overwriting Unnecessary TitleOverwrite recording a Existing title B After overwriting Overwrite recording a Existing title B Existing title CConnection to an External Device Settings for AN External DeviceUse K / L to select Video Input, then press OK External deviceRecording from an External Device Settings for AN External DeviceUse K / L to select Yes, then press OK Setting a Disc to ProtectTo cancel the disc protect Finalizing a Disc Press Setup Use K / L to select Disc Edit, then press OKUse K / L to select Finalize, then press OK Finalizing is completedAuto Finalizing Playing the Discs in Other DVD PlayersPlayable Discs and Files Information on PlaybackUnplayable Discs Color SystemsInformation on Playback CD Playback Mode menu will appearPBC playback control for Video CD Hint for DVD PlaybackDirect Playback Basic PlaybackPress Play B to start playback Press Stop C once to stop playback temporarilyPlayback from the Title List Basic PlaybackThen press OK Use K / L to select a desired titlePress Stop C once to stop playback Use K / L to select Play, thenPlayback Playing Back an Audio CD and a CD-RW/-R with MP3 FilesFollow steps 1 to 2 in Direct Playback on Pause Using the Title / Disc MenuDuring playback, press Pause F Playback will be paused and sound will be mutedResume Playback Special PlaybackFast Forward / Fast Reverse Playback Skipping TV Commercials During PlaybackRapid Playback Special PlaybackStep by Step Playback Slow Forward / Slow Reverse PlaybackDVD-video Marker SettingZoom Using Display Using H / GSearch Title / Chapter SearchAudio CD SearchTime Search Random Playback Repeat / Random / Program PlaybackRepeat Playback Program Playback Repeat / Random / Program PlaybackYou can program the disc to play back in your desired order Repeat this step until you program all the desired tracksFor DVD-video Audio soundtrack will switch Switching SubtitlesSwitching Audio Soundtrack Switching Camera Angles Switching Virtual Surround SystemSelecting the Format of Audio and Video Reducing Block NoiseGuide to a Title List Information on Disc EditingEditing Discs Press TitleDeleting Titles Editing DiscsPress Title Use K / L to select Edit, thenPutting Names on Titles Editing DiscsUse K / L to select Edit Title After this operation is completed, press Return to exitTitles on page 63 to display Edit menu Setting Chapter MarksUse K / L to select Chapter Mark, then press OK Use K / L to select Add, then press OKSelected chapter mark will be deleted Clearing Chapter MarksAll chapter marks will be deleted Clearing Chapter Marks cont’dTo delete all chapter marks Hiding Chapters You can set your desired scene as a thumbnail for each title Setting Pictures for ThumbnailsTitle will be divided into 2 new titles Dividing a TitleYou can divide one title into 2 new titles Putting Name on Disc Setting or Releasing Disc Protect Press Stop C if you are playing back a disc Erasing DiscYou can erase all titles on a disc Use K / L to select Yes, then press Making Edits CompatibleContents List of SettingsSetting List of SettingsPlayback Parental Lock Default OFF SetupsUse the Number buttons to enter the current password Playback cont’dDisc Audio Audio Language Default Original Disc Menu Language Default EnglishSubtitle Language Default OFF Angle Icon Default onRefer to 1 to 4 on page 82 and set the selected item DisplaySelection menu will appear For 3 refer to pagesScreen Saver Default 10 minutes OSD Language Default EnglishDisplay cont’d ChipFor 3 refer to VideoRefer to 1 to 2 on page 84 and set the selected item Video cont’d Progressive Scan Default OFFTV Aspect Default 43 Letter Box Reset the setting to default Reset AllPower TroubleshootingRemote control PictureRecording / Timer recording / Editing TroubleshootingRepairing process MAY not work OPEN/CLOSE a to take out the disc. The disc canceled duringOthers You press OPEN/CLOSE aError message Cause Solution Frequently Asked Questions Language Code Language CodeGlossary General SpecificationsRecording TunerDiscos Reproducibles EspañolCódigos de Región Disco GrabableVHF / UHF EspañolPresione OK para activar Ajste Manual de Reloj Presione STANDBY-ON yArriba Presione REC I para iniciar la grabaciónConfigurar una programación del Configure una programación delNuevo, y luego presione OK TemporizadorMemo Memo 1VMN23563 Customer ServiceTel Compatible before being able to see those effects on other Plug in the power cords of the devices to the AC outletTo stop recording 2Press REC Mode to select a recording modeOr the Number
Top Page Image Contents