Initial Setup (Continued)
DV Record Audio
You only need to set DV Record Audio if you have a digital camcorder with
•With the Audio 1 setting, the sound that was record- ed while shooting is used.
•With the Audio 2 setting, the overdubbed sound is used.
Disc Record Mode |
|
VCR Record Mode |
|
DV Record Audio | Audio 1 |
Auto Chapter | Audio 2 |
|
|
Prev. 
Select 
Close
Auto Chapter
During recording, chapter markers are added automati- cally at fixed intervals. You can set this interval to 5 min- utes or 10 minutes. To turn off automatic chapter mark- ing, select “OFF”.
Start
Select 
Close
1
2Use v / V to select the DISC option.
3 While the DISC option is selected, press B to move to the second level.
4Use v / V to select the Disc Initialize option.
Press B to move to the third | level. |
5 The Start icon is highlighted. |
|
6The Disc Initialize menu appears.Press ENTER.
7desired Disc Initialize Mode (VR Mode or Video
Mode) then press ENTER.
If the disc is a DVD+RW, go to step 8.If the disc is a
Disc Record Mode
VCR Record Mode
DV Record Audio
Auto Chapter
OFF
Disc Initialize
Select a mode.
5 Min
10 Min
Prev. 
Select 
Close
DISC Settings
Disc Initialize
When you load a blank disc, the recorder will initialize the disc.
DVD+R: The Initialize menu appears. Select “Yes” then press ENTER.
DVD+RW: The recorder initializes the disc in DVD+RW mode.
Also, you can format the disc from the Setup menu as shown below.
VR Mode |
| Video Mode |
8It may take a few minutes to initialize the disc.Use b / B to select “OK”, and press ENTER.
Disc Initialize
All data on the disc will be deleted.
Proceed?
OKCancel
Caution
If you change the disc format, everything recorded on the disc will be erased.
24