Seagate ST12450W/WD manual Contents

Page 2

Contents

 

Preface

1

Electrostatic discharge protection

1

Important safety information and precautions

2

Wichtige Sicherheitshinweise

5

Technical support services

10

General description

12

Initial setup information

17

Kühlung des Systems

28

© 1995 Seagate Technology, Inc. All rights reserved Publication Number: 83328890, Rev. B

March 1995

Seagate®, Seagate Technology®, and the Seagate logo are registered trademarks of Seagate Technology, Inc. Barracuda™, SeaFAX™, SeaFONE™, SeaTDD™, and SeaBOARD™ are trademarks of Seagate Tech- nology, Inc. Other product names areregistered trade- marks or trademarks of their owners.

No part of this publication may be reproduced in any form without written permission from SeagateTech- nology, Inc.

Image 2
Contents Barracuda 2, 2HP Contents Preface Electrostatic discharge protectionImportant safety information and precautions Page ST12450W/WD Installation Guide, Rev. B Wichtige Sicherheitshinweise ST12450W/WD Installation Guide, Rev. B Page ST12450W/WD Installation Guide, Rev. B Page SeaFONE 408 SeaFAX USA 408 438-2620 EnglandCompuServe Forum Location Modem number SeaTDD 408SeaBOARD General description Barracuda 2, 2HP disc drive Characteristics ST12450W/WD Amps ST12450W/WD Installation Guide, Rev. B Initial setup information Setting the Scsi ID jumpers Setting the Scsi ID Terminating the drive Scsi bus terminationTerminating ST12450W drives Terminator power J01Changing other applicable jumper options Additional jumper optionsJ4 Pin Synchronizing spindles Multiple drive configurations Spindle sync jumpers and connectorsSpindle sync diagram Providing adequate cooling Kühlung des Systems Suggested air flow Abbildung 9. Empfohlener Luftstromverlauf Mounting the drive and connecting cables Installation des Laufwerkes und Anschluß der Kabel ST12450W/WD Installation Guide, Rev. B DC power connector Abbildung 10. Gleichstromanschluß Hinweis Page Formatting the drive